Full Size mSATA SSD

STEP · STL Supports CommunityCAD0 downloads
Full Size mSATA SSD
1 / 5

Full Size mSATA SSD

The Full Size mSATA SSD (mSATA card): card length 50.8 mm, card width 29.85 mm, mounting hole diameter 2.6 mm. Available as simplified STEP files.

Full Size mSATA SSD, mSATA card

How these parts are made, and what the levels mean: read the method

  • Also known as: Full Size mSATA card, Full Size mini SATA SSD, Full Size mSATA solid state drive, Full Size mSATA module
  • Model id: msata-cards-full-size
  • Standard: mSATA card · size Full Size

Files

Part keySimplified
msata-cards-full-sizeSTEP

Dimensions

Dimension symbols for Full Size mSATA SSDs (mSATA card)

SymbolNameminnommaxModeledRuleLevel
LCard length50.6550.850.9550.8nominalL1
WCard width29.729.853029.85nominalL1
dhMounting hole diameter2.52.62.72.6nominalL0 (nom: one source)
phMounting hole spacing24.224.2nominalL0 (nom: one source)
xhMounting holes from the contact edge48.0548.05nominalL0 (nom: one source)
xeMounting holes from the far end2.932.93nominalL0 (nom: one source)
tPCB thickness0.911.11nominalL0 (nom: one source)
WtEdge connector tongue width25.5525.725.8525.7nominalL0 (nom: one source)
wsShoulder step at each side2.082.08nominalL0 (nom: one source)
lsTongue length3.333.33nominalL0 (nom: one source)
rsShoulder radius11nominalL0 (nom: one source)
wkKey notch width1.41.51.61.5nominalL0 (nom: one source)
dkKey notch depth3.944.14nominalL0 (nom: one source)
ykKey notch offset from the centreline3.853.85nominalL0 (nom: one source)
hkMounting hole to key notch8.258.25nominalL0 (nom: one source)
gkContact-free width around the key44single limit (min), modeled at the limitL0 (min: one source)
kcComponent keep-out from the contact edge4.24.2single limit (min), modeled at the limitL0 (min: one source)
ksComponent keep-out from the long edges0.50.5single limit (min), modeled at the limitL0 (min: one source)
koxHold-down keep-out, along the card5.655.85.955.8nominalL0 (nom: one source)
koyHold-down keep-out, across the card5.655.85.955.8nominalL0 (nom: one source)
htPrimary-side component height1.351.35single limit (max), modeled at the limitL0 (max: one source)
hbSecondary-side component height1.251.25single limit (max), modeled at the limitL0 (max: one source)

Drawing

Drawing of the Full Size mSATA SSD with its values (mSATA card)

As a PDF: CC-MSATA-SZ-full-size.pdf.

Conventions

  • Simplified only: the board, the label in three pieces, sixteen components and the gold pads. STEP AP214, millimetres, the board's secondary face at Z = 0 centred on the origin, the length along X with the contact edge toward +X.
  • The mounting holes are placed from the contact edge (xh); Micron's far-end figure (xe) is recorded, not modeled, since the two don't add up to its L.

Documents

Sources

adata-imss332-msata-r6, delkin-l50023-msata-rev-d, liteon-u8-msata-v1-0, longsys-s423-msata-a3, micron-m510-msata-rev-f, swissbit-x75m-r1-03, transcend-msa452t2-r1-2. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-MSATA-SZ-full-size.pdf

mSATA card envelope, full size Size drawing - full size values on the views - enlarged 2:1 Sym. Dimensio! kc = 4.20* Card length 50.80 50.65-50.95 Card width BE L ht < 1.35* 29.70-30.00 I hb = 1.25* 1.00% PCB thickness 0.90-1.10 25.70* 25.55-25.85 Edge connector tongue width Tongue length 3.33% dh…

View full datasheet →

docs/CC-MSATA-DS-full-size.pdf

'?) CommunityCAD CC-MSATA-DS-full-size rev A Size datasheet - full size mSATA full size card Size datasheet: this size's values with their levels, conventions and sources. === full size, front view, 1:2 full size, view from above, 1:2 Sym. Dimen L Card length W Card width t PCB thickness Wt Edge…

View full datasheet →