M6 Low Head Socket Cap Screw, DIN 7984

An M6 low head socket cap screw (DIN 7984) has a head 9.78 to 10 mm across and 3.82 to 4 mm tall, driven with a 4 mm hex key. This page has 12 lengths from 10 to 60 mm, each as simplified and threaded STEP.

How these parts are made, and what the levels mean: read the method

• Also searched as: M6 bolt, M6 x 10 to M6 x 60 bolts
• Model id: din7984-m6
• Standard: DIN 7984:2022 · thread M6 × 1, ISO metric coarse, right hand

Lengths

Length (mm)	Part key	Simplified	Threaded
10	din7984-m6x10	STEP	STEP
12	din7984-m6x12	STEP	STEP
16	din7984-m6x16	STEP	STEP
20	din7984-m6x20	STEP	STEP
25	din7984-m6x25	STEP	STEP
30	din7984-m6x30	STEP	STEP
35	din7984-m6x35	STEP	STEP
40	din7984-m6x40	STEP	STEP
45	din7984-m6x45	STEP	STEP
50	din7984-m6x50	STEP	STEP
55	din7984-m6x55	STEP	STEP
60	din7984-m6x60	STEP	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
P	Thread pitch		1		1	nominal	L1
b	Thread length, l up to 125		18 ref		18	reference value	L1
da	Transition diameter			6.8	6.8	single limit (max), modeled at the limit	L1
dk	Head diameter	9.78		10	9.89	midpoint of min–max	L1
ds	Shank diameter	5.82		6	5.91	midpoint of min–max	L1
dw	Bearing face diameter	9.2			9.2	single limit (min), modeled at the limit	L0 (min: one source)
e	Socket width across corners	4.58			4.58	single limit (min), modeled at the limit	L1
k	Head height	3.82		4	3.91	midpoint of min–max	L1
lf	Underhead fillet length			0.68	0.68	single limit (max), modeled at the limit	L1
r	Underhead fillet radius	0.25		0.4	0.325	midpoint of min–max	L0 (max: one source)
s	Socket width across flats	4.02	4	4.12	4.07	midpoint of min–max	L1
t	Socket depth	2.88	3	3.12	3	nominal	L1
v	Head top chamfer or radius			0.6	0.6	single limit (max), modeled at the limit	L0 (max: one source)
P	Coarse thread pitch		1		1	nominal	L1
tap_drill	Tap drill diameter		5		5	nominal	L1
d1	Basic minor diameter		4.917468		4.917468	nominal	L1
ch_angle	Chamfered end angle			50	50	single limit (max), modeled at the limit	L2
dh_fine	Clearance hole, fine series		6.4		6.4	nominal	L1
dh_medium	Clearance hole, medium series		6.6		6.6	nominal	L1
dh_coarse	Clearance hole, coarse series		7		7	nominal	L1

Thread and holes

• Tap drill: 5 mm (method: d − P), L1, sources amesweb-tap-drill, rule-tap-drill.
• Clearance hole (ISO 273): close 6.4, normal 6.6, loose 7 mm (L1: fine, medium and coarse series (albany-clearance, wikipedia-de-clearance)).

Drawing

As a PDF: CC-DIN7984-SZ-M6.pdf.

Goes with the M6 low head socket cap screw

• Hex key: 4 mm, the socket's nominal width across flats (s) in the table above.
• ISO 4032 hex nut, the same size as this M6 low head socket cap screw: M6 Hex Nut (Hexagon Nut), ISO 4032 / DIN 934
• ISO 7089 flat washer, the same size as this M6 low head socket cap screw: M6 Flat Washer (Plain Washer), ISO 7089

The M6 low head socket cap screw beside the M5 and the M8

The M6 is number 4, counting from the smallest, of the 5 DIN 7984 low head socket cap screws published here, from M3 to M8.

• Thread pitch (P): 1 mm on the M6 low head socket cap screw, against 0.8 mm on the M5 and 1.25 mm on the M8.
• Thread length, l up to 125 (b): 18 mm (reference) on the M6 low head socket cap screw, against 16 mm (reference) on the M5 and 22 mm (reference) on the M8.
• Transition diameter (da): up to 6.8 mm on the M6 low head socket cap screw, against up to 5.7 mm on the M5 and up to 9.2 mm on the M8.
• Head diameter (dk): 9.78 to 10 mm on the M6 low head socket cap screw, against 8.28 to 8.5 mm on the M5 and 12.73 to 13 mm on the M8.
• Shank diameter (ds): 5.82 to 6 mm on the M6 low head socket cap screw, against 4.82 to 5 mm on the M5 and 7.78 to 8 mm on the M8.
• Bearing face diameter (dw): at least 9.2 mm on the M6 low head socket cap screw, against at least 7.7 mm on the M5 and at least 12.03 mm on the M8.
• Socket width across corners (e): at least 4.58 mm on the M6 low head socket cap screw, against at least 3.44 mm on the M5 and at least 5.72 mm on the M8.
• Head height (k): 3.82 to 4 mm on the M6 low head socket cap screw, against 3.32 to 3.5 mm on the M5 and 4.82 to 5 mm on the M8.

Other sizes

• One size smaller: M5 Low Head Socket Cap Screw, DIN 7984, 8.28 to 8.5 mm head, 3 mm hex key.
• One size larger: M8 Low Head Socket Cap Screw, DIN 7984, 12.73 to 13 mm head, 5 mm hex key.

Documents

• CC-DIN7984-DS-M6.pdf: M6 datasheet: values with levels, lengths, sources
• CC-DIN7984-SZ-M6.pdf: M6 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

albany-clearance, amesweb-tap-drill, aspen-din7984, aspen-din7984-pages, fasten-it-din7984, fasteners-eu-din7984, fasteners-eu-din7984-lengths, globalfastener-din7984, iso4753-2011-sample, rule-basic-minor, rule-din7984-lg, rule-tap-drill, wikipedia-de-clearance, wikipedia-iso261. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.