ISO 10642 hexagon socket countersunk head screw, M4
Size drawing - M4 values on the views - | = 12 shown - enlarged 5:1
Thread pitch
View from above ak eh , ; dk theo s 8.96 @0 Head diameter, theoretical (sharp)
Head diameter, actual (land) 7.53-7.96
k = 2.48 Head height 2.48 2.121-2.48 2.121-2.48
s = 2.55 90 2.52-2.58 Head angle, deg
90-92
2.55 2.52-2.58
Socket across flats
| = 12 shown > 2.873 lengths 10-40 Socket across corners
e = 2.873 Socket depth dott 1.4-1.65
< 50° (ISO 4753 CH) 2 0.2
Underhead fillet radius
3.91 3.82-4.00
Shank diameter
20 ref
d1 = 3.2422 Thread length
Basic minor diameter (end face) 3.2422
tap Tap drill (method d - P) 3.3
< 50 a end End chamfer angle, deg
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 1- L113 - LO 4.
Notes
dk, k, t, a: modeled at one limit (dk min, k max, t min, a min); the other has one source. s: the nominal is the key size; the socket is modeled at the middle of its band.
TITLE
'? CommunityCAD Size drawing, M4
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 10642:2026 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Countersunk socket screw - M4 SHEET REV SCALE PROJECTION UNITS CC-18010642-SZ-M4 A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE
eb6c875b0758ced249F7398440847c26413da3e0 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
