M5 Countersunk Socket Screw, ISO 10642
This M5 countersunk socket screw (ISO 10642) comes in 9 lengths from 12 to 50 mm, each as simplified and threaded STEP. Its head measures 9.43 to 10.07 mm across and 2.669 to 3.1 mm tall; the socket takes a 3 mm hex key.

How these parts are made, and what the levels mean: read the method
- Also known as: M5 flat head Allen bolt, M5 flat head socket cap screw, M5 countersunk Allen screw, M5 x 12 to M5 x 50
- Model id:
iso10642-m5
- Standard: ISO 10642:2026 · thread M5 × 0.8, ISO metric coarse, right hand
Lengths
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| P | Thread pitch | | 0.8 | | 0.8 | nominal | L1 |
| b | Thread length | | 22 ref | | 22 | reference value | L1 |
| dk_theo | Head diameter, theoretical | | | 11.2 | 11.2 | single limit (max), modeled at the limit | L1 |
| dk | Head diameter, actual | 9.43 | | 10.07 | 9.43 | modeled at the min (the max has one source) | L1 |
| ds | Shank diameter | 4.82 | | 5 | 4.91 | midpoint of min–max | L1 |
| e | Socket width across corners | 3.443 | | | 3.443 | single limit (min), modeled at the limit | L1 |
| k | Head height | 2.669 | | 3.1 | 3.1 | modeled at the max (the min has one source) | L1 |
| r | Underhead fillet radius | 0.2 | | | 0.2 | single limit (min), modeled at the limit | L1 |
| s | Socket width across flats | 3.02 | 3 | 3.08 | 3.05 | midpoint of min–max | L1 |
| t | Socket depth | 1.75 | | 2 | 1.75 | modeled at the min (the max has one source) | L1 |
| alpha | Head angle | 90 | | 92 | 90 | modeled at the min (the max has one source) | L1 |
| P | Coarse thread pitch | | 0.8 | | 0.8 | nominal | L1 |
| tap_drill | Tap drill diameter | | 4.2 | | 4.2 | nominal | L1 |
| d1 | Basic minor diameter | | 4.1339744 | | 4.1339744 | nominal | L1 |
| ch_angle | Chamfered end angle | | | 50 | 50 | single limit (max), modeled at the limit | L2 |
| dh_fine | Clearance hole, fine series | | 5.3 | | 5.3 | nominal | L1 |
| dh_medium | Clearance hole, medium series | | 5.5 | | 5.5 | nominal | L1 |
| dh_coarse | Clearance hole, coarse series | | 5.8 | | 5.8 | nominal | L1 |
Thread and holes
- Tap drill: 4.2 mm (method: d − P), L1, sources amesweb-tap-drill, rule-tap-drill.
- Clearance hole (ISO 273): close 5.3, normal 5.5, loose 5.8 mm (L1: fine, medium and coarse series (albany-clearance, wikipedia-de-clearance)).
Drawing

As a PDF: CC-ISO10642-SZ-M5.pdf.
Goes with the M5 countersunk socket screw
- Hex key: 3 mm, the socket's nominal width across flats (s) in the table above.
- ISO 4032 hex nut, the same size as this M5 countersunk socket screw: M5 Hex Nut, ISO 4032 / DIN 934
- ISO 7089 flat washer, the same size as this M5 countersunk socket screw: M5 Flat Washer, ISO 7089
The M5 countersunk socket screw beside the M4 and the M6
The M5 is number 3, counting from the smallest, of the 5 ISO 10642 countersunk socket screws published here, from M3 to M8.
- Thread pitch (P): 0.8 mm on the M5 countersunk socket screw, against 0.7 mm on the M4 and 1 mm on the M6.
- Thread length (b): 22 mm (reference) on the M5 countersunk socket screw, against 20 mm (reference) on the M4 and 24 mm (reference) on the M6.
- Head diameter, theoretical (dk_theo): up to 11.2 mm on the M5 countersunk socket screw, against up to 8.96 mm on the M4 and up to 13.44 mm on the M6.
- Head diameter, actual (dk): 9.43 to 10.07 mm on the M5 countersunk socket screw, against 7.53 to 7.96 mm on the M4 and 11.34 to 12.16 mm on the M6.
- Shank diameter (ds): 4.82 to 5 mm on the M5 countersunk socket screw, against 3.82 to 4 mm on the M4 and 5.82 to 6 mm on the M6.
- Socket width across corners (e): at least 3.443 mm on the M5 countersunk socket screw, against at least 2.873 mm on the M4 and at least 4.583 mm on the M6.
- Head height (k): 2.669 to 3.1 mm on the M5 countersunk socket screw, against 2.121 to 2.48 mm on the M4 and 3.218 to 3.72 mm on the M6.
- Underhead fillet radius (r): at least 0.2 mm on the M5 countersunk socket screw, against at least 0.2 mm on the M4 and at least 0.25 mm on the M6.
Other sizes
Conventions
- Simplified: plain shank at the nominal diameter, light for assemblies. Threaded: the ISO 68-1 thread, for close-ups and renders.
- Values given only as a limit are modeled at that limit.
- Head: a 90-degree cone (the lower limit of the one-sided head angle) laid out from the theoretical head diameter at the top face, cut by a cylindrical land at the actual head diameter (its minimum), sharp edges.
Documents
Sources
albany-clearance, amesweb-tap-drill, engineersedge-iso10642, fasten-it-iso10642, globalfastener-iso10642, globalfastener-iso10642-2026-drawing, globalfastener-iso10642-2026-lengths, iso4753-2011-sample, rule-basic-minor, rule-tap-drill, westfield-iso10642, wikipedia-de-clearance, wikipedia-iso261. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...