M3 Countersunk Socket Screw, ISO 10642

STEP · STL Supports CommunityCAD0 downloads
M3 Countersunk Socket Screw, ISO 10642
1 / 5

M3 Countersunk Socket Screw, ISO 10642

An M3 countersunk socket screw (ISO 10642) has a head 5.54 to 5.81 mm across and 1.522 to 1.86 mm tall, driven with a 2 mm hex key. This page has 7 lengths from 8 to 30 mm, each as simplified and threaded STEP.

M3 × 20 countersunk socket screw, ISO 10642

How these parts are made, and what the levels mean: read the method

  • Also known as: M3 flat head Allen bolt, M3 flat head socket cap screw, M3 countersunk Allen screw, M3 x 8 to M3 x 30
  • Model id: iso10642-m3
  • Standard: ISO 10642:2026 · thread M3 × 0.5, ISO metric coarse, right hand

Lengths

Length (mm)Part keySimplifiedThreaded
8iso10642-m3x8STEPSTEP
10iso10642-m3x10STEPSTEP
12iso10642-m3x12STEPSTEP
16iso10642-m3x16STEPSTEP
20iso10642-m3x20STEPSTEP
25iso10642-m3x25STEPSTEP
30iso10642-m3x30STEPSTEP

Dimensions

Dimension symbols for M3 countersunk socket screws (ISO 10642)

SymbolNameminnommaxModeledRuleLevel
PThread pitch0.50.5nominalL1
bThread length18 ref18reference valueL1
dk_theoHead diameter, theoretical6.726.72single limit (max), modeled at the limitL1
dkHead diameter, actual5.545.815.54modeled at the min (the max has one source)L1
dsShank diameter2.8632.93midpoint of min–maxL1
eSocket width across corners2.3032.303single limit (min), modeled at the limitL1
kHead height1.5221.861.86modeled at the max (the min has one source)L1
rUnderhead fillet radius0.10.1single limit (min), modeled at the limitL1
sSocket width across flats2.0222.082.05midpoint of min–maxL1
tSocket depth1.11.251.1modeled at the min (the max has one source)L1
alphaHead angle909290modeled at the min (the max has one source)L1
PCoarse thread pitch0.50.5nominalL1
tap_drillTap drill diameter2.52.5nominalL1
d1Basic minor diameter2.4587342.458734nominalL1
ch_angleChamfered end angle5050single limit (max), modeled at the limitL2
dh_fineClearance hole, fine series3.23.2nominalL1
dh_mediumClearance hole, medium series3.43.4nominalL1
dh_coarseClearance hole, coarse series3.63.6nominalL1

Thread and holes

  • Tap drill: 2.5 mm (method: d − P), L1, sources amesweb-tap-drill, rule-tap-drill.
  • Clearance hole (ISO 273): close 3.2, normal 3.4, loose 3.6 mm (L1: fine, medium and coarse series (albany-clearance, wikipedia-de-clearance)).

Drawing

Drawing of the M3 countersunk socket screw with its values (ISO 10642)

As a PDF: CC-ISO10642-SZ-M3.pdf.

Goes with the M3 countersunk socket screw

  • Hex key: 2 mm, the socket's nominal width across flats (s) in the table above.
  • ISO 4032 hex nut, the same size as this M3 countersunk socket screw: M3 Hex Nut, ISO 4032 / DIN 934
  • ISO 7089 flat washer, the same size as this M3 countersunk socket screw: M3 Flat Washer, ISO 7089

The M3 countersunk socket screw beside the M4

The M3 is the smallest of the 5 ISO 10642 countersunk socket screws published here, from M3 to M8.

  • Thread pitch (P): 0.5 mm on the M3 countersunk socket screw, against 0.7 mm on the M4.
  • Thread length (b): 18 mm (reference) on the M3 countersunk socket screw, against 20 mm (reference) on the M4.
  • Head diameter, theoretical (dk_theo): up to 6.72 mm on the M3 countersunk socket screw, against up to 8.96 mm on the M4.
  • Head diameter, actual (dk): 5.54 to 5.81 mm on the M3 countersunk socket screw, against 7.53 to 7.96 mm on the M4.
  • Shank diameter (ds): 2.86 to 3 mm on the M3 countersunk socket screw, against 3.82 to 4 mm on the M4.
  • Socket width across corners (e): at least 2.303 mm on the M3 countersunk socket screw, against at least 2.873 mm on the M4.
  • Head height (k): 1.522 to 1.86 mm on the M3 countersunk socket screw, against 2.121 to 2.48 mm on the M4.
  • Underhead fillet radius (r): at least 0.1 mm on the M3 countersunk socket screw, against at least 0.2 mm on the M4.

Other sizes

Conventions

  • Simplified: plain shank at the nominal diameter, light for assemblies. Threaded: the ISO 68-1 thread, for close-ups and renders.
  • Values given only as a limit are modeled at that limit.
  • Head: a 90-degree cone (the lower limit of the one-sided head angle) laid out from the theoretical head diameter at the top face, cut by a cylindrical land at the actual head diameter (its minimum), sharp edges.

Documents

Sources

albany-clearance, amesweb-tap-drill, engineersedge-iso10642, fasten-it-iso10642, globalfastener-iso10642, globalfastener-iso10642-2026-drawing, globalfastener-iso10642-2026-lengths, iso4753-2011-sample, rule-basic-minor, rule-tap-drill, westfield-iso10642, wikipedia-de-clearance, wikipedia-iso261. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO10642-DS-M3.pdf

CC-1S010642-DS-M3 revA Size datasheet - M3 '?) CommunityCAD ISO 10642 M3 countersunk socket screw Size datasheet: this size's values with their levels, its lengths, conventions and sources. Thread M3 x 0.5, ISO metric coarse, right hand Lengths 7 generated, | = 8-30 Files 14 STEP AP214 (simplified…

View full datasheet →

docs/CC-ISO10642-SZ-M3.pdf

ISO 10642 hexagon socket countersunk head screw, M3 Size drawing - M3 values on the views - | = 8 shown - enlarged 10:1 dk theo < 6.72 Thread pitch dk = 5.54 5.54-5.81 dk theo Head diameter, theoretical (sharp) = 1. Head diameter, actual (land) 1.522-1.86 141. 5.54-5.81 1.86 1.522-1.86 Head height…

View full datasheet →