C14 Power Entry Module, Switch and Fuse, Schurter DD11 size drawing (PDF)

Datasheet — C14 Power Entry Module, Switch and Fuse, Schurter DD11 by Milo

Open the PDF
C14 Power Entry Module, Switch and Fuse, Schurter DD11Get the CAD modelC14 Power Entry Module, Switch and Fuse, Schurter DD11CC-IECINLET-SZ-schurter-dd11.pdf

Text of this datasheet

IEC 60320 power inlet, per maker part number, schurter-dd11

Size drawing - schurter-dd11 values on the views - scale 1:1

[L :

cw = 47.1

Panel cutout, front mounting (the maker's reference, not modeled)

@dh = 3.25, ak = 90°

Sym.

wt hf wa ha ef es xc p

dh ak wb hb Lb lv ‘lw

wv

Dimensi

Flange width

Flange height

Front face width

Front face height

Front height

Front face projection

C14 offset (DD11)

Mounting hole pitch Mounting hole diameter Countersink angle

Body width

Body height

Body depth

Cover depth

Housing depth without the cover Cover step width

Cover step depth

Cover pin height (recorded) Earth terminal station Neutral terminal station

Line terminal pitch

Cutout width, front mounting Cutout height, front mounting Cutout corner radius

Cutout hole pitch

Cutout hole diameter

Panel thickness, greatest

'? CommunityCAD

TITLE

Source levels

Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing).

L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c =a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule.

This size's values: L2 27.

Notes

A dash: that maker's drawing doesn't state it.

Panel cutouts and thicknesses: the maker's reference, not modeled.

Coupler face, pins, latches, rocker and drawer illustrative: sheet DO2.

Size drawing, schurter-dd11

STANDARDS FOLLOWED No published standard: each maker's own drawing

FAMILY / DETAIL IEC 60320 power inlet - schurter-dd11

SHEET

CC-IECINLET-SZ-schurter-dd11| A 1:1

REV SCALE

PROJECTION UNITS

Dimensions in mm

SPEC VERSION

LICENSE

PAGE

3¢4229b833a653b73db51178a38d40486ee7c36b CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.