C14 Power Entry Module, Switch and Fuse, Schurter DD11 datasheet (PDF)

Datasheet — C14 Power Entry Module, Switch and Fuse, Schurter DD11 by Milo

Open the PDF
C14 Power Entry Module, Switch and Fuse, Schurter DD11Get the CAD modelC14 Power Entry Module, Switch and Fuse, Schurter DD11CC-IECINLET-DS-SCHURTER-DD11.pdf

Text of this datasheet

CC-IECINLET-DS-schurter-dd11 rev A Size datasheet - schurter-dd11

'?) CommunityCAD

Schurter DD11 power entry module

Size datasheet: this size's values with their levels, conventions and sources.

For panel mounting: takes a C13 cord ©| ©) Part key iec-inlets-schurter-dd11 Files 1 STEP AP214 (simplified)

schurter-dd11, front, 0.5:1 schurter-dd11, side, 0.5:1 (hidden lines dashed) Sym. Dimension Value wt Flange width 65 hf Flange height 30.5 wa Front face width 46.7 ha Front face height 2) 7 ef Front height 5 es Front face projection 2.5 xe C14 offset (DD11) 10.3 p Mounting hole pitch 56 dh Mounting hole diameter 3.25 ak Countersink angle 90 wb Body width 46.6 hb Body height 2H) dl, lb Body depth 30 lv Cover depth BS ol lw Housing depth without the cover 31.5 wv Cover step width 31.6 lvs Cover step depth 22.9 hv Cover pin height (recorded) 4

Modeled value: nominal, else the midpoint of min-max. < / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.

No published standard: each maker's own drawing Page 1/2 IEC 60320 power inlet - schurter-dd11 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.

---

CC-IECINLET-DS-schurter-dd11 rev A Size datasheet - schurter-dd11

'?) CommunityCAD

Dimensions (continued)

Sym. Dimension Value

xpe Earth terminal station 10.6 L2-1

xn Neutral terminal station 29.8 pnt Line terminal pitch 6 cw Cutout width, front mounting 47.1 ch Cutout height, front mounting 28.1 cr Cutout corner radius 4 cp Cutout hole pitch 56 cd Cutout hole diameter 3.4 smax Panel thickness, greatest <8

Conventions

« Each part its maker's drawing: No published standard for the body, flange, holes or panel cutout: every value is that part's maker drawing (L2, one lineage), CommunityCAD's model of it, not a Schurter or Qualtek file. IEC 60320-3 fixes only the coupler face and is paid.

« Panel cutouts are reference data: The panel cutout (front mounting, and rear mounting where the maker draws one) and panel thickness are the maker's own, on this page as reference; they are not modeled and aren't a shared "C14 cutout".

« Frame: The flange's back face (the panel's front face) at z = 0, the front face toward +Z, the body toward -Z, the mounting holes on X; the C14's earth pin toward +Y (DD11: toward +X, as Schurter draws it).

« Coupler opening and pins: Illustrative: the coupler opening's shape and depth and its pins (Qualtek's opening size where given), the flange outline between the drawn extents, the body's depth where only E is given, DD11's countersink diameter, rocker and fuse drawer, 6100-4's latches, the corner rounds and the terminal tabs.

« Terminals: Schurter's quick-connect variant (Eq) is modeled; its solder variant (Es) is recorded. Qualtek's solder pins as its drawing shows them.

Sources Source Publisher Retrieved sha256 schurter-dd11 SCHURTER AG 2026-11-07 1db97cffOdaf (kept outside the repo)

The whole series (verification map, corrections, drawings): CC-IECINLET-DS.

No published standard: each maker's own drawing Page 2/2 IEC 60320 power inlet - schurter-dd11 - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.