20 V-slot single Extrusion Corner Bracket
The 20 V-slot single extrusion corner bracket has legs 20 mm and 20 mm long and is 20 mm wide, with 7.2 mm holes. Here in simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 20 V-slot single cast angle bracket, 20 V-slot single angle corner connector, 20 V-slot single L bracket, 20 V-slot single gusset bracket
- Model id:
extrusion-corner-brackets-vs-single
- Standard: Extrusion corner bracket · size 20 V-slot single
Files
| Part key | Simplified |
|---|
extrusion-corner-brackets-vs-single | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| l | Leg length | | 20 | | 20 | nominal | L0 (nom: one source) |
| h | Upright leg length | | 20 | | 20 | nominal | L0 (nom: one source) |
| w | Width | | 20 | | 20 | nominal | L0 (nom: one source) |
| tc | Counterbore floor | | 3.5 | | 3.5 | nominal | L0 (nom: one source) |
| d | Hole diameter | | 7.2 | | 7.2 | nominal | L0 (nom: one source) |
| dc | Counterbore diameter | | 11 | | 11 | nominal | L0 (nom: one source) |
| f | Toe flat | | 1 | | 1 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-CORNBRKT-SZ-vs-single.pdf.
The 20 V-slot single extrusion corner bracket beside the 20 B-type slot 6 double and the 30 B-type slot 8 single
The 20 V-slot single is number 3 of the 10 Extrusion corner brackets published here, listed from 20 B-type slot 6 single to 45 slot 10 single.
- Leg length (l): 20 mm on the 20 V-slot single extrusion corner bracket, against 30 mm on the 20 B-type slot 6 double and 30 mm on the 30 B-type slot 8 single.
- Upright leg length (h): 20 mm on the 20 V-slot single extrusion corner bracket, against 30 mm on the 20 B-type slot 6 double and 30 mm on the 30 B-type slot 8 single.
- Width (w): 20 mm on the 20 V-slot single extrusion corner bracket, against 40 mm on the 20 B-type slot 6 double and 20 mm on the 30 B-type slot 8 single.
- Hole diameter (d): 7.2 mm on the 20 V-slot single extrusion corner bracket, against 5.2 mm on the 20 B-type slot 6 double and 6.3 mm on the 30 B-type slot 8 single.
Other sizes
Conventions
- Simplified only: one solid. STEP AP214, millimetres, the corner where the legs' profile faces meet on the Y axis, one leg's face at Z = 0 along +X, the other's at X = 0 up +Z, the width across Y from 0.
- Side walls, rib, key width and length, inside fillet and the curved diagonal are illustrative, not any maker's design.
- The CommunityCAD mark recessed 0.3 mm in an outside side wall, illustrative.
Documents
Sources
openbuilds-angle-corner. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...