20 V-slot l-5 Extrusion Joining Plate

STEP · STL Supports CommunityCAD0 downloads
20 V-slot l-5 Extrusion Joining Plate
1 / 6

20 V-slot l-5 Extrusion Joining Plate

5 holes of 5.1 mm through a plate 4 mm thick, 60 mm by 20 mm: the 20 V-slot l-5 extrusion joining plate, as simplified STEP files.

20 V-slot l-5 extrusion joining plate, Extrusion joining plate

How these parts are made, and what the levels mean: read the method

  • Also known as: 20 V-slot l-5 joining strip, 20 V-slot l-5 corner plate, 20 V-slot l-5 T plate, 20 V-slot l-5 flat connector plate
  • Model id: extrusion-joining-plates-vs-l-5
  • Standard: Extrusion joining plate · size 20 V-slot l-5

Files

Part keySimplified
extrusion-joining-plates-vs-l-5STEP

Dimensions

Dimension symbols for 20 V-slot l-5 extrusion joining plates (Extrusion joining plate)

SymbolNameminnommaxModeledRuleLevel
lLength6060nominalL0 (nom: one source)
wLeg width2020nominalL0 (nom: one source)
tThickness44nominalL0 (nom: one source)
dHole diameter5.15.1nominalL0 (nom: one source)
nNumber of holes55nominalL0 (nom: one source)
pHole spacing2020nominalL0 (nom: one source)
gHole to outer edge1010nominalL0 (nom: one source)
o2Second hole ordinate3030nominalL0 (nom: one source)
o3Third hole ordinate5050nominalL0 (nom: one source)
q2Upper hole ordinate3030nominalL0 (nom: one source)
q3Top hole ordinate5050nominalL0 (nom: one source)

Drawing

Drawing of the 20 V-slot l-5 extrusion joining plate with its values (Extrusion joining plate)

As a PDF: CC-JOINPLATE-SZ-vs-l-5.pdf.

The 20 V-slot l-5 extrusion joining plate beside the 20 V-slot strip-3 and the 20 V-slot t-5

The 20 V-slot l-5 is number 8 of the 21 Extrusion joining plate extrusion joining plates published here, listed from 20 B-type slot 6 inline-2 to 45 slot 10 inline-4.

  • Length (l): 60 mm on the 20 V-slot l-5 extrusion joining plate, the same on the 20 V-slot strip-3 and the 20 V-slot t-5.
  • Leg width (w): 20 mm on the 20 V-slot l-5 extrusion joining plate, against 18 mm on the 20 V-slot strip-3 and 20 mm on the 20 V-slot t-5.
  • Thickness (t): 4 mm on the 20 V-slot l-5 extrusion joining plate, the same on the 20 V-slot strip-3 and the 20 V-slot t-5.
  • Hole diameter (d): 5.1 mm on the 20 V-slot l-5 extrusion joining plate, the same on the 20 V-slot strip-3 and the 20 V-slot t-5.
  • Number of holes (n): 5 on the 20 V-slot l-5 extrusion joining plate, against 3 on the 20 V-slot strip-3 and 5 on the 20 V-slot t-5.
  • Hole spacing (p): 20 mm on the 20 V-slot l-5 extrusion joining plate, the same on the 20 V-slot t-5.
  • Hole to outer edge (g): 10 mm on the 20 V-slot l-5 extrusion joining plate, against 9 mm on the 20 V-slot strip-3 and 10 mm on the 20 V-slot t-5.
  • Second hole ordinate (o2): 30 mm on the 20 V-slot l-5 extrusion joining plate, the same on the 20 V-slot strip-3 and the 20 V-slot t-5.

Other sizes

Conventions

  • Simplified only: one solid. STEP AP214, millimetres, the face on the profile at Z = 0, the outer face at Z = t; inline plates along +X from a corner, L plates with the outer corner at the origin, T plates with the bar's outer edge on Y = 0.
  • The CommunityCAD mark recessed 0.3 mm in the outer face, clear of holes and edges, illustrative.

Documents

Sources

ooznest-plate-pages, openbuilds-joining-plates. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-JOINPLATE-DS-vs-l-5.pdf

CC-JOINPLATE-DS-vs-1-5 revA Size datasheet - vs-I-5 '?) CommunityCAD 20 V-slot L plate, 5 holes (extrusion joining plate) Size datasheet: this size's values with their levels, conventions and sources. e) For joining 20 V-slot extrusions Part key extrusion-joining-plates-vs-I-5 —a Files 1 STEP…

View full datasheet →

docs/CC-JOINPLATE-SZ-vs-l-5.pdf

Extrusion joining plate, inline, L and T, vs-I-5 Size drawing - vs-I-5 values on the views - enlarged 2:1 Leg width Thickness Hole diameter Number of holes Hole spacing Hole to outer edge Second hole ordinate 03 Third hole ordinate p = 20* oo q2 Upper hole ordinate holes: n = 5*, d = 5.10* q3 Top…

View full datasheet →