20 B-type slot 6 single Extrusion Corner Bracket
The 20 B-type slot 6 single extrusion corner bracket has legs 30 mm and 30 mm long and is 20 mm wide, with 5.3 mm holes. Here in simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 20 B-type slot 6 single cast angle bracket, 20 B-type slot 6 single angle corner connector, 20 B-type slot 6 single L bracket, 20 B-type slot 6 single gusset bracket
- Model id:
extrusion-corner-brackets-b6-single
- Standard: Extrusion corner bracket · size 20 B-type slot 6 single
Files
| Part key | Simplified |
|---|
extrusion-corner-brackets-b6-single | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| l | Leg length | | 30 | | 30 | nominal | L0 (nom: one source) |
| h | Upright leg length | | 30 | | 30 | nominal | L0 (nom: one source) |
| w | Width | | 20 | | 20 | nominal | L0 (nom: one source) |
| t | Wall thickness | | 4.5 | | 4.5 | nominal | L0 (nom: one source) |
| d | Hole diameter | | 5.3 | | 5.3 | nominal | L0 (nom: one source) |
| n | Number of holes | | 3 | | 3 | nominal | L0 (nom: one source) |
| k | Key height | | 1 | | 1 | nominal | L0 (nom: one source) |
| ex | Hole row on the first leg | | 10 | | 10 | nominal | L0 (nom: one source) |
| ex2 | Second hole row on the first leg | | 18 | | 18 | nominal | L0 (nom: one source) |
| ez | Hole row on the upright leg | | 18 | | 18 | nominal | L0 (nom: one source) |
| ey | Hole column from the side | | 10 | | 10 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-CORNBRKT-SZ-b6-single.pdf.
The 20 B-type slot 6 single extrusion corner bracket beside the 20 B-type slot 6 double
The 20 B-type slot 6 single is the first of the 10 Extrusion corner brackets published here, listed from 20 B-type slot 6 single to 45 slot 10 single.
- Leg length (l): 30 mm on the 20 B-type slot 6 single extrusion corner bracket, the same on the 20 B-type slot 6 double.
- Upright leg length (h): 30 mm on the 20 B-type slot 6 single extrusion corner bracket, the same on the 20 B-type slot 6 double.
- Width (w): 20 mm on the 20 B-type slot 6 single extrusion corner bracket, against 40 mm on the 20 B-type slot 6 double.
- Wall thickness (t): 4.5 mm on the 20 B-type slot 6 single extrusion corner bracket, the same on the 20 B-type slot 6 double.
- Hole diameter (d): 5.3 mm on the 20 B-type slot 6 single extrusion corner bracket, against 5.2 mm on the 20 B-type slot 6 double.
- Number of holes (n): 3 on the 20 B-type slot 6 single extrusion corner bracket, against 6 on the 20 B-type slot 6 double.
- Key height (k): 1 mm on the 20 B-type slot 6 single extrusion corner bracket, the same on the 20 B-type slot 6 double.
- Hole row on the first leg (ex): 10 mm on the 20 B-type slot 6 single extrusion corner bracket, the same on the 20 B-type slot 6 double.
Other sizes
Conventions
- Simplified only: one solid. STEP AP214, millimetres, the corner where the legs' profile faces meet on the Y axis, one leg's face at Z = 0 along +X, the other's at X = 0 up +Z, the width across Y from 0.
- Side walls, rib, key width and length, inside fillet and the curved diagonal are illustrative, not any maker's design.
- The CommunityCAD mark recessed 0.3 mm in an outside side wall, illustrative.
Documents
Sources
misumi-cast-brackets. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...