30 B-type slot 8 single Extrusion Corner Bracket
Legs of 30 mm and 30 mm, 20 mm across, with 6.3 mm holes: the 30 B-type slot 8 single extrusion corner bracket, as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 30 B-type slot 8 single cast angle bracket, 30 B-type slot 8 single angle corner connector, 30 B-type slot 8 single L bracket, 30 B-type slot 8 single gusset bracket
- Model id:
extrusion-corner-brackets-b8-single
- Standard: Extrusion corner bracket · size 30 B-type slot 8 single
Files
| Part key | Simplified |
|---|
extrusion-corner-brackets-b8-single | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| l | Leg length | | 30 | | 30 | nominal | L0 (nom: one source) |
| h | Upright leg length | | 30 | | 30 | nominal | L0 (nom: one source) |
| w | Width | | 20 | | 20 | nominal | L0 (nom: one source) |
| t | Wall thickness | | 4 | | 4 | nominal | L0 (nom: one source) |
| tu | Upright wall thickness | | 4.5 | | 4.5 | nominal | L0 (nom: one source) |
| d | Hole diameter | | 6.3 | | 6.3 | nominal | L0 (nom: one source) |
| n | Number of holes | | 2 | | 2 | nominal | L0 (nom: one source) |
| k | Key height | | 1 | | 1 | nominal | L0 (nom: one source) |
| ex | Hole row on the first leg | | 18 | | 18 | nominal | L0 (nom: one source) |
| ez | Hole row on the upright leg | | 15 | | 15 | nominal | L0 (nom: one source) |
| ey | Hole column from the side | | 10 | | 10 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-CORNBRKT-SZ-b8-single.pdf.
The 30 B-type slot 8 single extrusion corner bracket beside the 20 V-slot single and the 30 B-type slot 8 double
The 30 B-type slot 8 single is number 4 of the 10 Extrusion corner brackets published here, listed from 20 B-type slot 6 single to 45 slot 10 single.
- Leg length (l): 30 mm on the 30 B-type slot 8 single extrusion corner bracket, against 20 mm on the 20 V-slot single and 30 mm on the 30 B-type slot 8 double.
- Upright leg length (h): 30 mm on the 30 B-type slot 8 single extrusion corner bracket, against 20 mm on the 20 V-slot single and 30 mm on the 30 B-type slot 8 double.
- Width (w): 20 mm on the 30 B-type slot 8 single extrusion corner bracket, against 20 mm on the 20 V-slot single and 50 mm on the 30 B-type slot 8 double.
- Wall thickness (t): 4 mm on the 30 B-type slot 8 single extrusion corner bracket, against 4.5 mm on the 30 B-type slot 8 double.
- Hole diameter (d): 6.3 mm on the 30 B-type slot 8 single extrusion corner bracket, against 7.2 mm on the 20 V-slot single and 6.2 mm on the 30 B-type slot 8 double.
- Number of holes (n): 2 on the 30 B-type slot 8 single extrusion corner bracket, against 4 on the 30 B-type slot 8 double.
- Key height (k): 1 mm on the 30 B-type slot 8 single extrusion corner bracket, the same on the 30 B-type slot 8 double.
Other sizes
Conventions
- Simplified only: one solid. STEP AP214, millimetres, the corner where the legs' profile faces meet on the Y axis, one leg's face at Z = 0 along +X, the other's at X = 0 up +Z, the width across Y from 0.
- Side walls, rib, key width and length, inside fillet and the curved diagonal are illustrative, not any maker's design.
- The CommunityCAD mark recessed 0.3 mm in an outside side wall, illustrative.
Documents
Sources
misumi-cast-brackets. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...