280 DC Motor

STEP Supports CommunityCAD0 downloads
280 DC Motor
1 / 6

280 DC Motor

A 2 mm shaft, 12.2 mm long, comes out of the 24.2 mm can of the 280 DC motor (DC can motor), which is 30.5 mm long. It mounts by two 2.3 mm holes 14 mm apart. Here as simplified STEP files. Modeled from Mabuchi's RC-280RA and Johnson Electric's NF213G drawings. Johnson Electric's NF213G is flat-sided (#1369 item 1); its face and shaft back this round can.

280 DC motor, DC can motor

How these parts are made, and what the levels mean: read the method

  • Also known as: 280 brushed DC motor, 280 can motor, 280 hobby motor
  • Model id: dc-motors-280
  • Standard: DC can motor · size 280

Files

Part keySimplified
dc-motors-280STEP

Dimensions

Dimension symbols for 280 DC motors (DC can motor)

SymbolNameminnommaxModeledRuleLevel
DCan diameter24.224.2nominalL1
LBody length30.530.5nominalL1
LtOverall length45 ref45reference valueL0 (ref: one source)
EShaft length12.212.2nominalL1
dShaft diameter22nominalL1
BFront boss diameter6.356.35nominalL1
hFront boss height1.61.6nominalL1
BrRear boss diameter8.58.5nominalL1
hrRear boss height2.82.8nominalL1
AMounting hole spacing1414nominalL0 (nom: one source)
nhNumber of mounting holes22nominalL0 (nom: one source)
dhMounting hole diameter2.32.3nominalL0 (nom: one source)

Drawing

Drawing of the 280 DC motor with its values (DC can motor)

As a PDF: CC-DCMOTOR-SZ-280.pdf.

What each maker states

  • Where the makers' drawings differ, the model takes the largest stated, so a mount made to it clears every maker's motor (ADR 0134 row 4): shaft length E 12.2 mm (Johnson Electric 10.5, Mabuchi 12.2); front boss B 6.35 mm (Johnson Electric 6.15, Mabuchi 6.35); rear boss Br 8.5 mm (Johnson Electric 6.25, Mabuchi 8.5); rear boss height hr 2.8 mm (Johnson Electric 2.8, Mabuchi 2). Check your own motor's drawing where it matters.

The 280 DC motor beside the Mabuchi FA-130RA, 130 and the 540

The 280 is number 2 of the 5 DC can motor DC motors published here, listed from Mabuchi FA-130RA, 130 to 775.

  • Can diameter (D): 24.2 mm on the 280 DC motor, against 20.1 mm on the Mabuchi FA-130RA, 130 and 35.8 mm on the 540.
  • Body length (L): 30.5 mm on the 280 DC motor, against 25 mm on the Mabuchi FA-130RA, 130 and 50 mm on the 540.
  • Overall length (Lt): 45 mm (reference) on the 280 DC motor, against 38 mm (reference) on the Mabuchi FA-130RA, 130 and 67 mm (reference) on the 540.
  • Shaft length (E): 12.2 mm on the 280 DC motor, against 9.4 mm on the Mabuchi FA-130RA, 130 and 18 mm on the 540.
  • Shaft diameter (d): 2 mm on the 280 DC motor, against 2 mm on the Mabuchi FA-130RA, 130 and 3.175 mm on the 540.
  • Front boss diameter (B): 6.35 mm on the 280 DC motor, against 6.15 mm on the Mabuchi FA-130RA, 130 and 13 mm on the 540.
  • Front boss height (h): 1.6 mm on the 280 DC motor, against 1.7 mm on the Mabuchi FA-130RA, 130 and 4.5 mm on the 540.
  • Rear boss diameter (Br): 8.5 mm on the 280 DC motor, against 10 mm on the Mabuchi FA-130RA, 130 and 13 mm on the 540.

Other sizes

  • One size smaller: Mabuchi FA-130RA, 130 DC Motor, 20.1 mm can, 25 mm long, 2 mm shaft, Mabuchi Motor data.
  • One size larger: 540 DC Motor, 35.8 mm can, 50 mm long, 3.175 mm shaft, M3 mounting holes 25 mm apart, Johnson Electric and Mabuchi Motor data.

Conventions

  • Simplified only: six solids, the can, the end cap (or the brush plate inside the end bell), the shaft, two solder tabs and the polarity dot. STEP AP214, millimetres, the mounting face at Z = 0 centred on the shaft's axis, the shaft along +Z.
  • Mounting face at Z = 0, the shaft along +Z, the can toward -Z, the mounting holes on the X axis; tapped holes are plain bores at the thread's nominal diameter.

Documents

Sources

johnson-nf213g-023, johnson-nf213g-023-figures, mabuchi-complete. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-DCMOTOR-DS-280.pdf

* CC-DCMOTOR-DS-280 revA '?) CommunityCAD Size datasheet - 280 280 DC motor Size datasheet: this size's values with their levels, conventions and sources. For 280 motor mounts, clamps and pinions Part key dc-motors-280 Files 1 STEP AP214 (simplified) 280, mounting face, 0.75:1 280, side, 0.5:1…

View full datasheet →

docs/CC-DCMOTOR-SZ-280.pdf

Brushed DC can motor, can class, 280 Size drawing - 280 values on the views - enlarged 3:1 Sym. Dimensi 24.2 Can diameter @B = 6.35 Body length 30.5 @d = 2.000 45.0 refx Overall length, not modeled Shaft length from the mounting face Tot Shaft diameter Front boss diameter Front boss height Rear…

View full datasheet →