37d-24-ENC Gearmotor, Pololu, With Encoder
A 6 mm D-shaft, 22 mm long, leaves the 24 mm gearbox of the 37d-24-ENC gearmotor (Pololu gearmotor, with encoder), whose gearbox is 36.8 mm across and fixed by six M3 holes on a 31 mm circle. Its encoder adds 15.4 mm behind the motor. Here as simplified STEP files.

This model is CommunityCAD's own, drawn from Pololu's published drawing; Pololu did not make or endorse it.
How these parts are made, and what the levels mean: read the method
- Also known as: 37d-24-ENC gear motor, 37d-24-ENC geared DC motor, 37d-24-ENC metal gearmotor
- Model id:
gearmotors-pololu-37d-24-enc
- Standard: Pololu gearmotor · size 37d-24
Files
| Part key | Simplified |
|---|
gearmotors-pololu-37d-24-enc | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| D | Gearbox diameter | | 36.8 | | 36.8 | nominal | L2 |
| Lg | Gearbox length | | 24 | | 24 | nominal | L2 |
| Lm | Motor length | | 30.7 | | 30.7 | nominal | L2 |
| Dm | Motor diameter | | 34.8 | | 34.8 | nominal | L2 |
| E | Shaft length | | 22 | | 22 | nominal | L2 |
| d | Shaft diameter | | 6 | | 6 | nominal | L2 |
| f | Shaft across the flat | | 5.4 | | 5.4 | nominal | L2 |
| B | Front boss diameter | | 12 | | 12 | nominal | L2 |
| h | Front boss height | | 6 | | 6 | nominal | L2 |
| eo | Shaft offset | | 7 | | 7 | nominal | L2 |
| dt | Mounting hole thread | | 3 | | 3 | nominal | L2 |
| nh | Number of mounting holes | | 6 | | 6 | nominal | L2 |
| th | Mounting hole depth | | 3 | | 3 | nominal | L2 |
| Pc | Mounting hole circle | | 31 | | 31 | nominal | L2 |
| ph | Adjacent hole spacing | | 15.5 | | 15.5 | nominal | L2 |
| Br | Rear boss diameter | | 7.8 | | 7.8 | nominal | L2 |
| hr | Rear boss height | | 1.6 | | 1.6 | nominal | L2 |
| lt | Terminal reach | | 5 | | 5 | nominal | L2 |
| pt | Terminal spacing | | 22.5 | | 22.5 | nominal | L2 |
| tw | Terminal width | | 2.9 | | 2.9 | nominal | L2 |
| tt | Terminal thickness | | 0.5 | | 0.5 | nominal | L2 |
| le | Encoder length | | 15.4 | | 15.4 | nominal | L2 |
| De | Encoder diameter | | 34 | | 34 | nominal | L2 |
Drawing

As a PDF: CC-GM-POLOLU-SZ-37d-24.pdf.
The 37d-24-ENC gearmotor beside the 37d-21.5-ENC and the 37d-26.5-ENC
The 37d-24-ENC is number 8 of the 9 Pololu gearmotors published here, listed from 25d-17-ENC to 37d-26.5-ENC.
- Gearbox diameter (D): 36.8 mm on the 37d-24-ENC gearmotor, the same on the 37d-21.5-ENC and the 37d-26.5-ENC.
- Gearbox length (Lg): 24 mm on the 37d-24-ENC gearmotor, against 21.5 mm on the 37d-21.5-ENC and 26.5 mm on the 37d-26.5-ENC.
- Motor length (Lm): 30.7 mm on the 37d-24-ENC gearmotor, the same on the 37d-21.5-ENC and the 37d-26.5-ENC.
- Motor diameter (Dm): 34.8 mm on the 37d-24-ENC gearmotor, the same on the 37d-21.5-ENC and the 37d-26.5-ENC.
- Shaft length (E): 22 mm on the 37d-24-ENC gearmotor, the same on the 37d-21.5-ENC and the 37d-26.5-ENC.
- Shaft diameter (d): 6 mm on the 37d-24-ENC gearmotor, the same on the 37d-21.5-ENC and the 37d-26.5-ENC.
- Shaft across the flat (f): 5.4 mm on the 37d-24-ENC gearmotor, the same on the 37d-21.5-ENC and the 37d-26.5-ENC.
- Front boss diameter (B): 12 mm on the 37d-24-ENC gearmotor, the same on the 37d-21.5-ENC and the 37d-26.5-ENC.
The 37d-24-ENC gearmotor in its other versions
Other sizes
- One size smaller: 37d-21.5-ENC Gearmotor, Pololu, With Encoder, 36.8 mm gearbox, 21.5 mm long, 6 mm D-shaft, M3 mounting holes on a 31 mm circle, Pololu data.
- One size larger: 37d-26.5-ENC Gearmotor, Pololu, With Encoder, 36.8 mm gearbox, 26.5 mm long, 6 mm D-shaft, M3 mounting holes on a 31 mm circle, Pololu data.
Conventions
- Simplified only: seven solids, the gearbox, the shaft, the can, the end cap (with the encoder cover on the encoder version), two terminals and the polarity dot. STEP AP214, millimetres, the output shaft's axis on the gearbox's face at the origin, the shaft along +Z.
Documents
Sources
nfp-gm37-520, pololu-37d-gearmotors. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...