280 DC Motor size drawing (PDF)

Datasheet — 280 DC Motor by Milo

Open the PDF
280 DC MotorGet the CAD model280 DC MotorCC-DCMOTOR-SZ-280.pdf

Text of this datasheet

Brushed DC can motor, can class, 280

Size drawing - 280 values on the views - enlarged 3:1

Sym. Dimensi

24.2

Can diameter

@B = 6.35 Body length 30.5

@d = 2.000 45.0 refx

Overall length, not modeled

Shaft length from the mounting face Tot

Shaft diameter

Front boss diameter

Front boss height

Rear boss diameter

Rear boss height

Mounting hole spacing

Number of mounting holes

dh Mounting hole diameter

Source levels

Main value = the modeled value (nominal, else the middle of min-max).

Grey under a value = its min-max, where the source gives both.

< / = = the source gives only that limit, modeled at it. ref = reference.

L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.

LO = one source only: printed amber and marked *.

c = a source value was corrected; the datasheet says how.

House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L18 - LO 4.

Notes

No published standard: each maker's drawing is its own lineage (ADR 0034). Where makers differ, the largest stated (ADR 0134 row 4).

End cap, bell, vents, terminals and mark illustrative: sheet DO2.

TITLE

'? CommunityCAD Size drawing, 280

STANDARDS FOLLOWED FAMILY / DETAIL Makers' drawings (Mabuchi, Johnson Electric, AndyMark); no published standard Brushed DC can motor - 280

SHEET REV SCALE PROJECTION UNITS

CC-DCMOTOR-SZ-280 A 3:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 304229b833a653b73db51178a38d40486ee7c36b CC-BY 4.0 IronPixel Labs LLC 1/1

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.