Mabuchi FA-130RA, 130 DC Motor

STEP Supports CommunityCAD0 downloads
Mabuchi FA-130RA, 130 DC Motor
1 / 6

Mabuchi FA-130RA, 130 DC Motor

The Mabuchi FA-130RA, 130 DC motor (DC can motor) has a 20.1 mm can with flats 15.1 mm across, 25 mm long, and a 2 mm shaft 9.4 mm long. Modeled as simplified STEP files. Modeled from Mabuchi's FA-130RA drawing alone, a maker drawing of its named part (ADR 0089).

Mabuchi FA-130RA, 130 DC motor, DC can motor

This model is CommunityCAD's own, drawn from Mabuchi Motor's published drawing; Mabuchi Motor did not make or endorse it.

How these parts are made, and what the levels mean: read the method

  • Also known as: Mabuchi FA-130RA, 130 brushed DC motor, Mabuchi FA-130RA, 130 can motor, Mabuchi FA-130RA, 130 hobby motor
  • Model id: dc-motors-130
  • Standard: DC can motor · size Mabuchi FA-130RA, 130

Files

Part keySimplified
dc-motors-130STEP

Dimensions

Dimension symbols for Mabuchi FA-130RA, 130 DC motors (DC can motor)

SymbolNameminnommaxModeledRuleLevel
DCan diameter20.120.1nominalL2
WWidth across the flats15.115.1nominalL2
LBody length2525nominalL2
LtOverall length38 ref38reference valueL2
EShaft length9.49.4nominalL2
dShaft diameter22nominalL2
BFront boss diameter6.156.15nominalL2
hFront boss height1.71.7nominalL2
BrRear boss diameter1010nominalL2
hrRear boss height2.32.3nominalL2

Drawing

Drawing of the Mabuchi FA-130RA, 130 DC motor with its values (DC can motor)

As a PDF: CC-DCMOTOR-SZ-130.pdf.

The Mabuchi FA-130RA, 130 DC motor beside the 280

The Mabuchi FA-130RA, 130 is the first of the 5 DC can motor DC motors published here, listed from Mabuchi FA-130RA, 130 to 775.

  • Can diameter (D): 20.1 mm on the Mabuchi FA-130RA, 130 DC motor, against 24.2 mm on the 280.
  • Body length (L): 25 mm on the Mabuchi FA-130RA, 130 DC motor, against 30.5 mm on the 280.
  • Overall length (Lt): 38 mm (reference) on the Mabuchi FA-130RA, 130 DC motor, against 45 mm (reference) on the 280.
  • Shaft length (E): 9.4 mm on the Mabuchi FA-130RA, 130 DC motor, against 12.2 mm on the 280.
  • Shaft diameter (d): 2 mm on the Mabuchi FA-130RA, 130 DC motor, the same on the 280.
  • Front boss diameter (B): 6.15 mm on the Mabuchi FA-130RA, 130 DC motor, against 6.35 mm on the 280.
  • Front boss height (h): 1.7 mm on the Mabuchi FA-130RA, 130 DC motor, against 1.6 mm on the 280.

Other sizes

  • One size larger: 280 DC Motor, 24.2 mm can, 30.5 mm long, 2 mm shaft, 2.3 mm mounting holes 14 mm apart, Johnson Electric and Mabuchi Motor data.

Conventions

  • Simplified only: six solids, the can, the end cap (or the brush plate inside the end bell), the shaft, two solder tabs and the polarity dot. STEP AP214, millimetres, the mounting face at Z = 0 centred on the shaft's axis, the shaft along +Z.
  • Mounting face at Z = 0, the shaft along +Z, the can toward -Z, the mounting holes on the X axis; tapped holes are plain bores at the thread's nominal diameter.

Documents

Sources

mabuchi-fa130ra. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-DCMOTOR-DS-130.pdf

'?) CommunityCAD CC-DCMOTOR-DS-130 rev A Size datasheet - 130 Mabuchi FA-130RA, 130 DC motor Size datasheet: this size's values with their levels, conventions and sources. For 130 motor mounts, clamps and pinions Part key dc-motors-130 Files 1 STEP AP214 (simplified) 130, mounting face, 1:1 130,…

View full datasheet →

docs/CC-DCMOTOR-SZ-130.pdf

Brushed DC can motor, can class, 130 Size drawing - 130 values on the views - enlarged 3:1 Sym. Dimensi Can diameter Width across the flats Body length Overall length, not modeled 38.0 ref Shaft length from the mounting face 7.4 Shaft diameter Bole Front boss diameter Front boss height Rear boss…

View full datasheet →