Mabuchi FA-130RA, 130 DC Motor
The Mabuchi FA-130RA, 130 DC motor (DC can motor) has a 20.1 mm can with flats 15.1 mm across, 25 mm long, and a 2 mm shaft 9.4 mm long. Modeled as simplified STEP files. Modeled from Mabuchi's FA-130RA drawing alone, a maker drawing of its named part (ADR 0089).

This model is CommunityCAD's own, drawn from Mabuchi Motor's published drawing; Mabuchi Motor did not make or endorse it.
How these parts are made, and what the levels mean: read the method
- Also known as: Mabuchi FA-130RA, 130 brushed DC motor, Mabuchi FA-130RA, 130 can motor, Mabuchi FA-130RA, 130 hobby motor
- Model id:
dc-motors-130
- Standard: DC can motor · size Mabuchi FA-130RA, 130
Files
| Part key | Simplified |
|---|
dc-motors-130 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| D | Can diameter | | 20.1 | | 20.1 | nominal | L2 |
| W | Width across the flats | | 15.1 | | 15.1 | nominal | L2 |
| L | Body length | | 25 | | 25 | nominal | L2 |
| Lt | Overall length | | 38 ref | | 38 | reference value | L2 |
| E | Shaft length | | 9.4 | | 9.4 | nominal | L2 |
| d | Shaft diameter | | 2 | | 2 | nominal | L2 |
| B | Front boss diameter | | 6.15 | | 6.15 | nominal | L2 |
| h | Front boss height | | 1.7 | | 1.7 | nominal | L2 |
| Br | Rear boss diameter | | 10 | | 10 | nominal | L2 |
| hr | Rear boss height | | 2.3 | | 2.3 | nominal | L2 |
Drawing

As a PDF: CC-DCMOTOR-SZ-130.pdf.
The Mabuchi FA-130RA, 130 DC motor beside the 280
The Mabuchi FA-130RA, 130 is the first of the 5 DC can motor DC motors published here, listed from Mabuchi FA-130RA, 130 to 775.
- Can diameter (D): 20.1 mm on the Mabuchi FA-130RA, 130 DC motor, against 24.2 mm on the 280.
- Body length (L): 25 mm on the Mabuchi FA-130RA, 130 DC motor, against 30.5 mm on the 280.
- Overall length (Lt): 38 mm (reference) on the Mabuchi FA-130RA, 130 DC motor, against 45 mm (reference) on the 280.
- Shaft length (E): 9.4 mm on the Mabuchi FA-130RA, 130 DC motor, against 12.2 mm on the 280.
- Shaft diameter (d): 2 mm on the Mabuchi FA-130RA, 130 DC motor, the same on the 280.
- Front boss diameter (B): 6.15 mm on the Mabuchi FA-130RA, 130 DC motor, against 6.35 mm on the 280.
- Front boss height (h): 1.7 mm on the Mabuchi FA-130RA, 130 DC motor, against 1.6 mm on the 280.
Other sizes
- One size larger: 280 DC Motor, 24.2 mm can, 30.5 mm long, 2 mm shaft, 2.3 mm mounting holes 14 mm apart, Johnson Electric and Mabuchi Motor data.
Conventions
- Simplified only: six solids, the can, the end cap (or the brush plate inside the end bell), the shaft, two solder tabs and the polarity dot. STEP AP214, millimetres, the mounting face at Z = 0 centred on the shaft's axis, the shaft along +Z.
- Mounting face at Z = 0, the shaft along +Z, the can toward -Z, the mounting holes on the X axis; tapped holes are plain bores at the thread's nominal diameter.
Documents
Sources
mabuchi-fa130ra. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...