540 DC Motor
Mount the 540 DC motor (DC can motor) by two M3 holes 25 mm apart: its can is 35.8 mm across and 50 mm long, the shaft 3.175 mm by 18 mm. Download it as simplified STEP files. Modeled from Mabuchi's RS-540RH and Johnson Electric's HC610G drawings.

How these parts are made, and what the levels mean: read the method
- Also known as: 540 brushed DC motor, 540 can motor, 540 hobby motor
- Model id:
dc-motors-540
- Standard: DC can motor · size 540
Files
| Part key | Simplified |
|---|
dc-motors-540 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| D | Can diameter | | 35.8 | | 35.8 | nominal | L1 |
| L | Body length | | 50 | | 50 | nominal | L1 |
| Lt | Overall length | | 67 ref | | 67 | reference value | L0 (ref: one source) |
| E | Shaft length | | 18 | | 18 | nominal | L1 |
| d | Shaft diameter | | 3.175 | | 3.175 | nominal | L1 |
| B | Front boss diameter | | 13 | | 13 | nominal | L1 |
| h | Front boss height | | 4.5 | | 4.5 | nominal | L1 |
| Br | Rear boss diameter | | 13 | | 13 | nominal | L0 (nom: one source) |
| hr | Rear boss height | | 3 | | 3 | nominal | L1 |
| A | Mounting hole spacing | | 25 | | 25 | nominal | L1 |
| nh | Number of mounting holes | | 2 | | 2 | nominal | L0 (nom: one source) |
| dt | Mounting hole thread | | 3 | | 3 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-DCMOTOR-SZ-540.pdf.
What each maker states
- Where the makers' drawings differ, the model takes the largest stated, so a mount made to it clears every maker's motor (ADR 0134 row 4): shaft length E 18 mm (Johnson Electric 18, Mabuchi 13); rear boss height hr 3 mm (Johnson Electric 2.8, Mabuchi 3). Check your own motor's drawing where it matters.
The 540 DC motor beside the 280 and the 550
The 540 is number 3 of the 5 DC can motor DC motors published here, listed from Mabuchi FA-130RA, 130 to 775.
- Can diameter (D): 35.8 mm on the 540 DC motor, against 24.2 mm on the 280 and 35.8 mm on the 550.
- Body length (L): 50 mm on the 540 DC motor, against 30.5 mm on the 280 and 57 mm on the 550.
- Overall length (Lt): 67 mm (reference) on the 540 DC motor, against 45 mm (reference) on the 280 and 75 mm (reference) on the 550.
- Shaft length (E): 18 mm on the 540 DC motor, against 12.2 mm on the 280 and 21 mm on the 550.
- Shaft diameter (d): 3.175 mm on the 540 DC motor, against 2 mm on the 280 and 3.175 mm on the 550.
- Front boss diameter (B): 13 mm on the 540 DC motor, against 6.35 mm on the 280 and 13 mm on the 550.
- Front boss height (h): 4.5 mm on the 540 DC motor, against 1.6 mm on the 280 and 4.5 mm on the 550.
- Rear boss diameter (Br): 13 mm on the 540 DC motor, against 8.5 mm on the 280 and 13 mm on the 550.
Other sizes
- One size smaller: 280 DC Motor, 24.2 mm can, 30.5 mm long, 2 mm shaft, 2.3 mm mounting holes 14 mm apart, Johnson Electric and Mabuchi Motor data.
- One size larger: 550 DC Motor, 35.8 mm can, 57 mm long, 3.175 mm shaft, M3 mounting holes 25 mm apart, Johnson Electric and Mabuchi Motor data.
Conventions
- Simplified only: six solids, the can, the end cap (or the brush plate inside the end bell), the shaft, two solder tabs and the polarity dot. STEP AP214, millimetres, the mounting face at Z = 0 centred on the shaft's axis, the shaft along +Z.
- Mounting face at Z = 0, the shaft along +Z, the can toward -Z, the mounting holes on the X axis; tapped holes are plain bores at the thread's nominal diameter.
Documents
Sources
johnson-hc610g-011, johnson-hc610g-011-figures, mabuchi-complete. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...