M6 Countersunk Socket Screw, ISO 10642

STEP · STL Supports CommunityCAD0 downloads
M6 Countersunk Socket Screw, ISO 10642
1 / 5

M6 Countersunk Socket Screw, ISO 10642

An M6 countersunk socket screw (ISO 10642) has a head 11.34 to 12.16 mm across and 3.218 to 3.72 mm tall, driven with a 4 mm hex key. This page has 11 lengths from 12 to 60 mm, each as simplified and threaded STEP.

M6 × 20 countersunk socket screw, ISO 10642

How these parts are made, and what the levels mean: read the method

  • Also known as: M6 flat head Allen bolt, M6 flat head socket cap screw, M6 countersunk Allen screw, M6 x 12 to M6 x 60
  • Model id: iso10642-m6
  • Standard: ISO 10642:2026 · thread M6 × 1, ISO metric coarse, right hand

Lengths

Length (mm)Part keySimplifiedThreaded
12iso10642-m6x12STEPSTEP
16iso10642-m6x16STEPSTEP
20iso10642-m6x20STEPSTEP
25iso10642-m6x25STEPSTEP
30iso10642-m6x30STEPSTEP
35iso10642-m6x35STEPSTEP
40iso10642-m6x40STEPSTEP
45iso10642-m6x45STEPSTEP
50iso10642-m6x50STEPSTEP
55iso10642-m6x55STEPSTEP
60iso10642-m6x60STEPSTEP

Dimensions

Dimension symbols for M6 countersunk socket screws (ISO 10642)

SymbolNameminnommaxModeledRuleLevel
PThread pitch11nominalL1
bThread length24 ref24reference valueL1
dk_theoHead diameter, theoretical13.4413.44single limit (max), modeled at the limitL1
dkHead diameter, actual11.3412.1611.34modeled at the min (the max has one source)L1
dsShank diameter5.8265.91midpoint of min–maxL1
eSocket width across corners4.5834.583single limit (min), modeled at the limitL1
kHead height3.2183.723.72modeled at the max (the min has one source)L1
rUnderhead fillet radius0.250.25single limit (min), modeled at the limitL1
sSocket width across flats4.0244.0954.0575midpoint of min–maxL1
tSocket depth2.22.52.2modeled at the min (the max has one source)L1
alphaHead angle909290modeled at the min (the max has one source)L1
PCoarse thread pitch11nominalL1
tap_drillTap drill diameter55nominalL1
d1Basic minor diameter4.9174684.917468nominalL1
ch_angleChamfered end angle5050single limit (max), modeled at the limitL2
dh_fineClearance hole, fine series6.46.4nominalL1
dh_mediumClearance hole, medium series6.66.6nominalL1
dh_coarseClearance hole, coarse series77nominalL1

Thread and holes

  • Tap drill: 5 mm (method: d − P), L1, sources amesweb-tap-drill, rule-tap-drill.
  • Clearance hole (ISO 273): close 6.4, normal 6.6, loose 7 mm (L1: fine, medium and coarse series (albany-clearance, wikipedia-de-clearance)).

Drawing

Drawing of the M6 countersunk socket screw with its values (ISO 10642)

As a PDF: CC-ISO10642-SZ-M6.pdf.

Goes with the M6 countersunk socket screw

  • Hex key: 4 mm, the socket's nominal width across flats (s) in the table above.
  • ISO 4032 hex nut, the same size as this M6 countersunk socket screw: M6 Hex Nut, ISO 4032 / DIN 934
  • ISO 7089 flat washer, the same size as this M6 countersunk socket screw: M6 Flat Washer, ISO 7089

The M6 countersunk socket screw beside the M5 and the M8

The M6 is number 4, counting from the smallest, of the 5 ISO 10642 countersunk socket screws published here, from M3 to M8.

  • Thread pitch (P): 1 mm on the M6 countersunk socket screw, against 0.8 mm on the M5 and 1.25 mm on the M8.
  • Thread length (b): 24 mm (reference) on the M6 countersunk socket screw, against 22 mm (reference) on the M5 and 28 mm (reference) on the M8.
  • Head diameter, theoretical (dk_theo): up to 13.44 mm on the M6 countersunk socket screw, against up to 11.2 mm on the M5 and up to 17.92 mm on the M8.
  • Head diameter, actual (dk): 11.34 to 12.16 mm on the M6 countersunk socket screw, against 9.43 to 10.07 mm on the M5 and 15.24 to 16.43 mm on the M8.
  • Shank diameter (ds): 5.82 to 6 mm on the M6 countersunk socket screw, against 4.82 to 5 mm on the M5 and 7.78 to 8 mm on the M8.
  • Socket width across corners (e): at least 4.583 mm on the M6 countersunk socket screw, against at least 3.443 mm on the M5 and at least 5.723 mm on the M8.
  • Head height (k): 3.218 to 3.72 mm on the M6 countersunk socket screw, against 2.669 to 3.1 mm on the M5 and 4.366 to 4.96 mm on the M8.
  • Underhead fillet radius (r): at least 0.25 mm on the M6 countersunk socket screw, against at least 0.2 mm on the M5 and at least 0.4 mm on the M8.

Other sizes

Conventions

  • Simplified: plain shank at the nominal diameter, light for assemblies. Threaded: the ISO 68-1 thread, for close-ups and renders.
  • Values given only as a limit are modeled at that limit.
  • Head: a 90-degree cone (the lower limit of the one-sided head angle) laid out from the theoretical head diameter at the top face, cut by a cylindrical land at the actual head diameter (its minimum), sharp edges.

Documents

Sources

albany-clearance, amesweb-tap-drill, engineersedge-iso10642, fasten-it-iso10642, globalfastener-iso10642, globalfastener-iso10642-2026-drawing, globalfastener-iso10642-2026-lengths, iso4753-2011-sample, rule-basic-minor, rule-tap-drill, westfield-iso10642, wikipedia-de-clearance, wikipedia-iso261. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO10642-DS-M6.pdf

CC-1S010642-DS-Mé6 revA Size datasheet - M6 '?) CommunityCAD ISO 10642 M6 countersunk socket screw Size datasheet: this size's values with their levels, its lengths, conventions and sources. Thread M6 x 1, ISO metric coarse, right hand Lengths 11 generated, | = 12-60 Files 22 STEP AP214…

View full datasheet →

docs/CC-ISO10642-SZ-M6.pdf

ISO 10642 hexagon socket countersunk head screw, M6 Size drawing - M6 values on the views - | = 16 shown - enlarged 5:1 Thread pitch . , < 13.44 dk theo s 13.44 dk theo Head diameter, theoretical (sharp) dk = 11.34 11.34 11.34-12.16 Head diameter, actual (land) 11.34-12.16 3.72 3.218-3.72 Head…

View full datasheet →