ISO 10642 hexagon socket countersunk head screw, M6
Size drawing - M6 values on the views - | = 16 shown - enlarged 5:1
Thread pitch
. , < 13.44 dk theo s 13.44 dk theo Head diameter, theoretical (sharp)
dk = 11.34
11.34 11.34-12.16 Head diameter, actual (land)
11.34-12.16
3.72 3.218-3.72
Head height 3.218-3.72 90 90-92
Head angle, deg
4.0575 4.020-4.095
Socket across flats
2 4.583 Socket across corners
| = 16 shown
lengths 12-60 Socket depth Bod 2.2-2.5
> Underhead fillet radius 2 0.25
5.91 5.82-6.00
= 50° (ISO 4753 CH) Thread length 24 ref
Shank diameter
4.9175
Basic minor diameter (end face)
; d1 = 4.9175 tap Tap drill (method d - P)
a end End chamfer angle, deg
View from above
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
s = 4.0575 House convention = a detail no source dimensions, drawn to a stated house rule. 4020-4.098 This size's values: L2 1-L113- LO 4.
Notes
dk, k, t, a: modeled at one limit (dk min, k max, t min, a min); the other has one source.
s: the nominal is the key size; the socket is modeled at the middle of its band.
TITLE
'? CommunityCAD Size drawing, M6
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 10642:2026 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Countersunk socket screw - M6 SHEET REV SCALE PROJECTION UNITS CC-18010642-SZ-Mé A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE eb6c875b0758ced249F7398440847c26413da3e0 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
