M6 Countersunk Socket Screw, ISO 10642 datasheet (PDF)

Datasheet — M6 Countersunk Socket Screw, ISO 10642 by Milo

Open the PDF
M6 Countersunk Socket Screw, ISO 10642Get the CAD modelM6 Countersunk Socket Screw, ISO 10642CC-ISO10642-DS-M6.pdf

Text of this datasheet

CC-1S010642-DS-Mé6 revA Size datasheet - M6

'?) CommunityCAD

ISO 10642 M6 countersunk socket screw

Size datasheet: this size's values with their levels, its lengths, conventions and sources.

Thread M6 x 1, ISO metric coarse, right hand

Lengths 11 generated, | = 12-60

Files 22 STEP AP214 (simplified + threaded)

Simplified - M6x20, front view, 2.5:1 Threaded - M6x20, front view, 2.5:1 Sym. Dimensi Value Level

P Thread pitch 1 la: 4

dk theo Head diameter, theoretical (sharp) < 13.44 L1- 4

dk Head diameter, actual (land) 11.34 L1-4 11.34-12.16

k Head height 3.72 1-4 3.218-3.72

a Head angle, deg 90 L1 - 2 90-92

s Socket across flats 4.0575 L1 - 3 4.020-4.095

e Socket across corners > 4.583 L1-4

t Socket depth 2.2 L1- 4 2.2-2.5

r Underhead fillet radius > 0.25 L1 - 3

ds Shank diameter 5.91 L1- 3 5.82-6.00

b Thread length 24 ref L1 +: 4

di Basic minor diameter (end face) 4.9175 L1- 2

tap Tap drill (method d - P) 5 La - 2

a end End chamfer angle, deg < 50 pea |

Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given, modeled at the limit. * amber: one source (LO). c: a source value was corrected. Level - independent sources.

ISO 10642:2026 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Page 1/2 Countersunk socket screw - M6 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec eb6c875b0758ced249F7398440847c26413da3e0

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.

---

CC-1S010642-DS-Mé6 revA Size datasheet - M6

'?) CommunityCAD

Lengths

| Thread b (ref) Full thread from Part key

12 tothe head - 6.72* is010642-m6x12 16 tothe head 2 6.72 iso10642-m6x16 20 to the head - 6.72 iso10642-m6x20 25 to the head 2 6.72 is010642-m6x25 30 to the head - 6.72* is010642-m6x30 35 tothe head - 6.72* is010642-m6x35 40 partial 24 ref 16* is010642-m6x40 45 partial 24 ref 21* is010642-m6x45 50 partial 24 ref 26x iso10642-m6x50 55 partial 24 ref 31* is010642-m6x55 60 partial 24 ref 36* is010642-m6x60

b = thread length from the tip (ref); full thread from | - b below the top face. To the head: the incomplete thread a < 3P under k, full thread from k + 3P. Both from globalfastener's length pages, one source (LO). Listed by one source only, not generated: | = 8, 10.

Conventions

e End: ISO 4753 chamfered end (CH), end face at d1, chamfer at the angle limit.

* Socket: regular hexagon at the modeled s, sharp corners, one corner on +X, flat floor at t.

« Head: 90° cone from dk theoretical, land at dk min, k max, sharp edges; the same on both levels.

e Thread (threaded level): ISO 68-1 basic profile; full thread from | - b (or k + 3P), quarter-turn fade toward the head.

e dk, k, t, a: modeled at one limit (dk min, k max, t min, a min); the other has one source.

« Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.

Sources Source Publisher Retrieved sha256 amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a pule-tap-drill CommunityCAD 2026-10-23 625b582c306e pule-basic-minor CommunityCAD 2026-10-23 00329692204 iso4753-2011-sample ISO (preview published by iTeh n/a 7526d25f9381 (kept outside the repo) Standards) fasten-it-iso10642 fasten.it 2026-10-25 fe5862c3dcéd globalfastener-iso10642 globalfastener.com (Internet 2026-10-25 88b567aafaf3 Archive copy, captured 2026- 04-11) globalfastener-iso10642-2026-drawing globalfastener.com 2026-10-25 e8f4ce02b189 (kept outside the repo) globalfastener-iso10642-2026-series globalfastener.com 2026-11-10 4518a267a2ee bossard-bn2101 Bossard 2026-11-10 09a59ae81789 (kept outside the repo) globalfastener-iso10642-2026-lengths globalfastener.com 2026-11-10 4518a267a2ee westfield-iso10642 Westfield Fasteners 2026-10-25 2a737635ac40 engineersedge-iso10642 Engineers Edge 2026-10-25 8cSa2e59f0a6

The whole series (verification map, corrections, drawings): CC-ISO10642-DS.

ISO 10642:2026 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Page 2/2 Countersunk socket screw - M6 - both detail levels - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec eb6c875b0758ced249F7398440847c26413da3e0

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.