CC-1S010642-DS-M5 revA Size datasheet - MS
'?) CommunityCAD
ISO 10642 M5 countersunk socket screw
Size datasheet: this size's values with their levels, its lengths, conventions and sources.
Thread M5 x 0.8, ISO metric coarse, right hand Lengths 9 generated, | = 12-50 Files 18 STEP AP214 (simplified + threaded) Simplified - M5x20, front view, 3:1 Threaded - M5x20, front view, 3:1 Sym. Dimensi Value Level P Thread pitch 0.8 1-4 dk theo Head diameter, theoretical (sharp) < 11.20 L1-4 dk Head diameter, actual (land) 9.43 L1-4 9.43-10.07 k Head height 3.1 L1-4 2.669-3.1 a Head angle, deg 90 L1- 2 90-92 s Socket across flats 3.05 L1- 3 3.02-3.08 e Socket across corners > 3.443 L1 +4 t Socket depth 1.75¢ L1- 2 1.75-2 r Underhead fillet radius > 0.2 L1- 3 ds Shank diameter 4.91 Ll + 3 4.82-5.00 b Thread length 22 ref Lil o & di Basic minor diameter (end face) 4.134 L1- 2 tap Tap drill (method d - P) 4.2 L1- 2
a end End chamfer angle, deg < 50
Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given, modeled at the limit. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
ISO 10642:2026 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Page 1/2 Countersunk socket screw - M5 - both detail levels - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec eb6c875b0758ced249F7398440847c26413da3e0
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-1S010642-DS-M5 revA Size datasheet - M5
'?) CommunityCAD
Lengths | Thread b (ref) Full thread from Part key 12 tothe head - 5.5* iso10642-m5x12 16 tothe head 2 5.5* iso10642-m5x16 20 to the head - 5.5* iso10642-m5x20 25 to the head 2 5.5% iso10642-m5x25 30 to the head - 5.5% is010642-m5x30 35 partial 22 ref 13* iso10642-m5x35 40 partial 22 ref 18x is010642-m5x40 45 partial 22 ref 23x is010642-m5x45 50 partial 22 ref 28x iso10642-m5x50
b = thread length from the tip (ref); full thread from | - b below the top face. To the head: the incomplete thread a < 3P under k, full thread from k + 3P. Both from globalfastener's length pages, one source (LO). Listed by one source only, not generated: | = 8, 10.
Conventions
« End: ISO 4753 chamfered end (CH), end face at d1, chamfer at the angle limit.
* Socket: regular hexagon at the modeled s, sharp corners, one corner on +X, flat floor at t.
* Head: 90° cone from dk theoretical, land at dk min, k max, sharp edges; the same on both levels.
e Thread (threaded level): ISO 68-1 basic profile; full thread from | - b (or k + 3P), quarter-turn fade toward the head.
e dk, k, t, a: modeled at one limit (dk min, k max, t min, a min); the other has one source.
« Values given only as a limit are modeled at that limit. Features the standard does not dimension are house conventions.
Sources Source Publisher Retrieved sha256 amesweb-tap-drill AMESweb 2026-10-23 e6501cc1414a pule-tap-drill CommunityCAD 2026-10-23 625b582c306e pule-basic-minor CommunityCAD 2026-10-23 00329692204 iso4753-2011-sample ISO (preview published by iTeh n/a 7526d25f9381 (kept outside the repo) Standards) fasten-it-iso10642 fasten.it 2026-10-25 fe5862c3dcéd globalfastener-iso10642 globalfastener.com (Internet 2026-10-25 88b567aafaf3 Archive copy, captured 2026- 04-11) globalfastener-iso10642-2026-drawing globalfastener.com 2026-10-25 e8f4ce02b189 (kept outside the repo) globalfastener-iso10642-2026-series globalfastener.com 2026-11-10 4518a267a2ee bossard-bn2101 Bossard 2026-11-10 09a59ae81789 (kept outside the repo) globalfastener-iso10642-2026-lengths globalfastener.com 2026-11-10 4518a267a2ee westfield-iso10642 Westfield Fasteners 2026-10-25 2a737635ac40 engineersedge-iso10642 Engineers Edge 2026-10-25 8cSa2e59f0a6
The whole series (verification map, corrections, drawings): CC-ISO10642-DS.
ISO 10642:2026 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Page 2/2 Countersunk socket screw - M5 - both detail levels - Dimensions in mm - CC-BY 4.0, IronPixel Labs LLC spec eb6c875b0758ced249F7398440847c26413da3e0
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
