ISO 10642 hexagon socket countersunk head screw, M5
Size drawing - M5 values on the views - | = 16 shown - enlarged 5:1
Thread pitch 8-68
View from above dk th . . < 11.20 dk theo s 11.20 @0 Head diameter, theoretical (sharp)
dk = 9.43 9.43 9.43-10.07 Head diameter, actual (land)
| 9.43-10.07
. 3.1 Head height k= 31 9 2.669-3.1 2.669-3.1
s = 3.05 90 3.02-3.08 Head angle, deg 90-92
3.05 3.02-3.08
Socket across flats
2 3.443 Socket across corners
| = 16 shown . 1.75c
lengths 12-50 ~ Socket depth 1.75-2
> Underhead fillet radius 2 0.2
4.91 4.82-5.00
Shank diameter
< 50° (ISO 4753 CH) Thread length 22 ref
Basic minor diameter (end face) aes
d1 = 4.134 tap Tap drill (method d - P) |
a end End chamfer angle, deg
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 1- L113 - LO 4.
Notes
dk, k, t, a: modeled at one limit (dk min, k max, t min, a min); the other has one source. s: the nominal is the key size; the socket is modeled at the middle of its band.
TITLE
'? CommunityCAD Size drawing, M5
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 10642:2026 - ISO 4753:2011 (ends) - ISO 68-1/ ISO 261 (thread) Countersunk socket screw - M5 SHEET REV SCALE PROJECTION UNITS CC-18010642-SZ-M5 A 5:11 € Dimensions in mm SPEC VERSION LICENSE PAGE eb6c875b0758ced249F7398440847c26413da3e0 CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
