M4 Countersunk Socket Screw, ISO 10642

STEP · STL Supports CommunityCAD0 downloads
M4 Countersunk Socket Screw, ISO 10642
1 / 5

M4 Countersunk Socket Screw, ISO 10642

Driven with a 2.5 mm hex key, the M4 countersunk socket screw (ISO 10642) has a head 7.53 to 7.96 mm across and 2.121 to 2.48 mm tall. Its M4 × 0.7 thread comes in 8 lengths from 10 to 40 mm, each as simplified and threaded STEP.

M4 × 20 countersunk socket screw, ISO 10642

How these parts are made, and what the levels mean: read the method

  • Also known as: M4 flat head Allen bolt, M4 flat head socket cap screw, M4 countersunk Allen screw, M4 x 10 to M4 x 40
  • Model id: iso10642-m4
  • Standard: ISO 10642:2026 · thread M4 × 0.7, ISO metric coarse, right hand

Lengths

Length (mm)Part keySimplifiedThreaded
10iso10642-m4x10STEPSTEP
12iso10642-m4x12STEPSTEP
16iso10642-m4x16STEPSTEP
20iso10642-m4x20STEPSTEP
25iso10642-m4x25STEPSTEP
30iso10642-m4x30STEPSTEP
35iso10642-m4x35STEPSTEP
40iso10642-m4x40STEPSTEP

Dimensions

Dimension symbols for M4 countersunk socket screws (ISO 10642)

SymbolNameminnommaxModeledRuleLevel
PThread pitch0.70.7nominalL1
bThread length20 ref20reference valueL1
dk_theoHead diameter, theoretical8.968.96single limit (max), modeled at the limitL1
dkHead diameter, actual7.537.967.53modeled at the min (the max has one source)L1
dsShank diameter3.8243.91midpoint of min–maxL1
eSocket width across corners2.8732.873single limit (min), modeled at the limitL1
kHead height2.1212.482.48modeled at the max (the min has one source)L1
rUnderhead fillet radius0.20.2single limit (min), modeled at the limitL1
sSocket width across flats2.522.52.582.55midpoint of min–maxL1
tSocket depth1.41.651.4modeled at the min (the max has one source)L1
alphaHead angle909290modeled at the min (the max has one source)L1
PCoarse thread pitch0.70.7nominalL1
tap_drillTap drill diameter3.33.3nominalL1
d1Basic minor diameter3.24222763.2422276nominalL1
ch_angleChamfered end angle5050single limit (max), modeled at the limitL2
dh_fineClearance hole, fine series4.34.3nominalL1
dh_mediumClearance hole, medium series4.54.5nominalL1
dh_coarseClearance hole, coarse series4.84.8nominalL1

Thread and holes

  • Tap drill: 3.3 mm (method: d − P), L1, sources amesweb-tap-drill, rule-tap-drill.
  • Clearance hole (ISO 273): close 4.3, normal 4.5, loose 4.8 mm (L1: fine, medium and coarse series (albany-clearance, wikipedia-de-clearance)).

Drawing

Drawing of the M4 countersunk socket screw with its values (ISO 10642)

As a PDF: CC-ISO10642-SZ-M4.pdf.

Goes with the M4 countersunk socket screw

  • Hex key: 2.5 mm, the socket's nominal width across flats (s) in the table above.
  • ISO 4032 hex nut, the same size as this M4 countersunk socket screw: M4 Hex Nut, ISO 4032 / DIN 934
  • ISO 7089 flat washer, the same size as this M4 countersunk socket screw: M4 Flat Washer, ISO 7089

The M4 countersunk socket screw beside the M3 and the M5

The M4 is number 2, counting from the smallest, of the 5 ISO 10642 countersunk socket screws published here, from M3 to M8.

  • Thread pitch (P): 0.7 mm on the M4 countersunk socket screw, against 0.5 mm on the M3 and 0.8 mm on the M5.
  • Thread length (b): 20 mm (reference) on the M4 countersunk socket screw, against 18 mm (reference) on the M3 and 22 mm (reference) on the M5.
  • Head diameter, theoretical (dk_theo): up to 8.96 mm on the M4 countersunk socket screw, against up to 6.72 mm on the M3 and up to 11.2 mm on the M5.
  • Head diameter, actual (dk): 7.53 to 7.96 mm on the M4 countersunk socket screw, against 5.54 to 5.81 mm on the M3 and 9.43 to 10.07 mm on the M5.
  • Shank diameter (ds): 3.82 to 4 mm on the M4 countersunk socket screw, against 2.86 to 3 mm on the M3 and 4.82 to 5 mm on the M5.
  • Socket width across corners (e): at least 2.873 mm on the M4 countersunk socket screw, against at least 2.303 mm on the M3 and at least 3.443 mm on the M5.
  • Head height (k): 2.121 to 2.48 mm on the M4 countersunk socket screw, against 1.522 to 1.86 mm on the M3 and 2.669 to 3.1 mm on the M5.
  • Underhead fillet radius (r): at least 0.2 mm on the M4 countersunk socket screw, against at least 0.1 mm on the M3 and at least 0.2 mm on the M5.

Other sizes

Conventions

  • Simplified: plain shank at the nominal diameter, light for assemblies. Threaded: the ISO 68-1 thread, for close-ups and renders.
  • Values given only as a limit are modeled at that limit.
  • Head: a 90-degree cone (the lower limit of the one-sided head angle) laid out from the theoretical head diameter at the top face, cut by a cylindrical land at the actual head diameter (its minimum), sharp edges.

Documents

Sources

albany-clearance, amesweb-tap-drill, engineersedge-iso10642, fasten-it-iso10642, globalfastener-iso10642, globalfastener-iso10642-2026-drawing, globalfastener-iso10642-2026-lengths, iso4753-2011-sample, rule-basic-minor, rule-tap-drill, westfield-iso10642, wikipedia-de-clearance, wikipedia-iso261. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO10642-DS-M4.pdf

CC-1S010642-DS-M4 revA Size datasheet - M4 '?) CommunityCAD ISO 10642 M4 countersunk socket screw Size datasheet: this size's values with their levels, its lengths, conventions and sources. Thread M4 x 0.7, ISO metric coarse, right hand Lengths 8 generated, | = 10-40 Files 16 STEP AP214…

View full datasheet →

docs/CC-ISO10642-SZ-M4.pdf

ISO 10642 hexagon socket countersunk head screw, M4 Size drawing - M4 values on the views - | = 12 shown - enlarged 5:1 Thread pitch View from above ak eh , ; dk theo s 8.96 @0 Head diameter, theoretical (sharp) Head diameter, actual (land) 7.53-7.96 k = 2.48 Head height 2.48 2.121-2.48 2.121-2.48…

View full datasheet →