IEC 60320 power inlet, per maker part number, schurter-6100-4
Size drawing - schurter-6100-4 values on the views - enlarged 2:1
Sym. Dimensi
wt Flange width
hf Flange height
tf Flange thickness
wb Body width
hb Body height
Es Terminal length, solder
Eq Terminal length, quick connect
cw Cutout width, front mounting ch Cutout height, front mounting cr Cutout corner radius
smin Panel thickness, least
smax Panel thickness, greatest
Source levels
Main value = the modeled value (nominal, else the middle of min-max).
Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 12.
Notes
A dash: that maker's drawing doesn't state it.
Panel cutouts and thicknesses: the maker's reference, not modeled.
Coupler face, pins, latches, rocker and drawer illustrative: sheet DO2.
; :
cw = 27.5
Panel cutout, front mounting (the maker's reference, not modeled)
TITLE
'? CommunityCAD Size drawing, schurter-6100-4
STANDARDS FOLLOWED FAMILY / DETAIL No published standard: each maker's own drawing IEC 60320 power inlet - schurter-6100-4
SHEET REV SCALE PROJECTION UNITS CC-IECINLET-SZ-schurter-6100-4 | A 2:1 Dimensions in mm
SPEC VERSION LICENSE PAGE 3¢4229b833a653b73db51178a38d40486ee7c36b CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
