'?) CommunityCAD
CC-IECINLET-DS-schurter-6100-4 revA Size datasheet - schurter-6100-4
Schurter 6100-4 C14 power inlet
Size datasheet: this size's values with their levels, conventions and sources.
schurter-6100-4, front, 0.75:1
Sym. wf hf tf wb hb Es Eq cw ch cr smin
smax
schurter-6100-4, side, 0.75:1 (hidden lines dashed)
Dimension
Flange width
Flange height
Flange thickness
Body width
Body height
Terminal length, solder Terminal length, quick connect Cutout width, front mounting Cutout height, front mounting Cutout corner radius
Panel thickness, least
Panel thickness, greatest
For panel mounting: takes a C13 cord
Part key iec-inlets-schurter-6100-4 Files 1 STEP AP214 (simplified)
Value Level
30
2 27.5 2 22. 25. 27.5 2
BS
e il a a a : pe : ‘
Modeled value: nominal, else the midpoint of min-max. < / =: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
No published standard: each maker's own drawing IEC 60320 power inlet - schurter-6100-4 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
Page 1/2 spec 3c4229b833a653b73db51178a38d40486ee7c36b
---
CC-IECINLET-DS-schurter-6100-4 revA Size datasheet - schurter-6100-4
'?) CommunityCAD
Conventions
¢ Each part its maker's drawing: No published standard for the body, flange, holes or panel cutout: every value is that part's maker drawing (L2, one lineage), CommunityCAD's model of it, not a Schurter or Qualtek file. IEC 60320-3 fixes only the coupler face and is paid.
« Panel cutouts are reference data: The panel cutout (front mounting, and rear mounting where the maker draws one) and panel thickness are the maker's own, on this page as reference; they are not modeled and aren't a shared "C14 cutout".
« Frame: The flange's back face (the panel's front face) at z = 0, the front face toward +Z, the body toward -Z, the mounting holes on X; the C14's earth pin toward +Y (DD11: toward +X, as Schurter draws it).
« Coupler opening and pins: Illustrative: the coupler opening's shape and depth and its pins (Qualtek's opening size where given), the flange outline between the drawn extents, the body's depth where only E is given, DD11's countersink diameter, rocker and fuse drawer, 6100-4's latches, the corner rounds and the terminal tabs.
¢ Terminals: Schurter's quick-connect variant (Eq) is modeled; its solder variant (Es) is recorded. Qualtek's solder pins as its drawing shows them.
Sources Source Publisher Retrieved sha256 schurter-6100-4 SCHURTER AG 2026-11-07 7¢218918b23f (kept outside the repo)
The whole series (verification map, corrections, drawings): CC-IECINLET-DS.
No published standard: each maker's own drawing Page 2/2 IEC 60320 power inlet - schurter-6100-4 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
