28BYJ-48 Geared Stepper Motor
The 28BYJ-48 geared stepper motor (28BYJ-48) has a body 28 mm across and 19 mm high, with 4.2 mm mounting holes 35 mm apart. Its 5 mm shaft, flatted to 3 mm, sits 8 mm off the body's centre. Modeled as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 28BYJ-48 unipolar stepper motor, 28BYJ-48 gear reduction stepper, 28BYJ-48 small stepper motor
- Model id:
geared-steppers-28byj48
- Standard: 28BYJ-48 · size 28BYJ-48
Files
| Part key | Simplified |
|---|
geared-steppers-28byj48 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| D | Body diameter | | 28 | | 28 | nominal | L1 |
| H | Body height | | 19 | | 19 | nominal | L1 |
| A | Mounting hole spacing | | 35 | | 35 | nominal | L1 |
| dh | Mounting hole diameter | | 4.2 | | 4.2 | nominal | L1 |
| Re | Ear end radius | | 3.5 | | 3.5 | nominal | L1 |
| we | Ear width | | 7 | | 7 | nominal | L1 |
| e | Shaft offset | | 8 | | 8 | nominal | L1 |
| db | Boss diameter | | 9 | | 9 | nominal | L0 (nom: one source) |
| hb | Boss height | | 1.5 | | 1.5 | nominal | L1 |
| ds | Shaft diameter | | 5 | | 5 | nominal | L1 |
| sf | Shaft across flats | | 3 | | 3 | nominal | L1 |
| ls | Shaft length | | 10 | | 10 | nominal | L1 |
| lf | Flat length | | 6 | | 6 | nominal | L1 |
| wb | Wiring box width | | 14.6 | | 14.6 | nominal | L1 |
| xb | Wiring box extent | | 17.5 | | 17.5 | nominal | L1 |
| sb | Wiring box set-back | | 2.7 | | 2.7 | nominal | L0 (nom: one source) |
| ll | Lead length | | 300 | | 300 | nominal | L1 |
Drawing

As a PDF: CC-BYJ48-SZ-28BYJ48.pdf.
Conventions
- Simplified only: eleven solids, the front plate with the ears and boss, the can, the wiring box, the shaft, five lead stubs and the label. STEP AP214, millimetres, the front face at Z = 0 centred on the body's axis, the shaft along +Z.
Documents
Sources
fulling-28byj48, kiatronics-28byj48. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...