9x14 Sintered Bronze Bushing (Oilite Bushing), ISO 2795

STEP · STL Supports CommunityCAD0 downloads
9x14 Sintered Bronze Bushing (Oilite Bushing), ISO 2795
1 / 7

9x14 Sintered Bronze Bushing (Oilite Bushing), ISO 2795

Pressed into a 14 mm housing bore, the 9x14 sintered bronze bushing (ISO 2795) carries a 9 mm shaft on its oil-filled wall. It comes in 3 lengths from 6 to 14 mm, each as simplified STEP.

9x14 × 10 sintered bronze bushing, ISO 2795

How these parts are made, and what the levels mean: read the method

  • Also searched as: 9x14 bushing, 9x14 x 6 to 9x14 x 14 bushings
  • Model id: iso2795-c-9x14
  • Standard: ISO 2795:2020 · size 9x14

Lengths

Length (mm)Part keySimplified
6iso2795-c-9x14x6STEP
10iso2795-c-9x14x10STEP
14iso2795-c-9x14x14STEP

Dimensions

Dimension symbols for 9x14 sintered bronze bushings (ISO 2795)

SymbolNameminnommaxModeledRuleLevel
dInside diameter99nominalL2
DOutside diameter1414nominalL2
CChamfer, maximum0.40.4single limit (max), modeled at the limitL2
C_angleChamfer angle4545nominalL1

Drawing

Drawing of the 9x14 sintered bronze bushing with its values (ISO 2795)

As a PDF: CC-ISO2795-SZ-9x14.pdf.

The 9x14 sintered bronze bushing beside the 8x11 and the 9x12

The 9x14 is number 15 of the 20 ISO 2795 sintered bronze bushings published here, listed from 2x5 to 12x16.

  • Inside diameter (d): 9 mm on the 9x14 sintered bronze bushing, against 8 mm on the 8x11 and 9 mm on the 9x12.
  • Outside diameter (D): 14 mm on the 9x14 sintered bronze bushing, against 11 mm on the 8x11 and 12 mm on the 9x12.
  • Chamfer, maximum (C): up to 0.4 mm on the 9x14 sintered bronze bushing, against up to 0.3 mm on the 8x11 and up to 0.3 mm on the 9x12.
  • Chamfer angle (C_angle): 45° on the 9x14 sintered bronze bushing, the same on the 8x11 and the 9x12.

Other sizes

Documents

Sources

bowman-iso2795-plain, iso2795-2020-sample, iso2795-2020-sample-figures, selfoil-iso2795-plain. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO2795-SZ-9x14.pdf

ISO 2795 sintered bronze bush, cylindrical, 9x14 Size drawing - 9x14 values on the views - L = 10 shown; lengths 6, 10, 14 - enlarged 5:1 9x14 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = =…

View full datasheet →

docs/CC-ISO2795-DS-9x14.pdf

* CC-1S02795-DS-9x14 revA '?) CommunityCAD Size datasheet - 9x14 ISO 2795 9x14 sintered bronze bush Size datasheet: this bush's values with their levels, conventions and sources. For 9 mm shafts ina 14 mm housing bore Part key iso2795-c-9x14x<L> Files 3 STEP AP214 (simplified), one per length…

View full datasheet →