ISO 2795 sintered bronze bush, cylindrical, 9x14
Size drawing - 9x14 values on the views - L = 10 shown; lengths 6, 10, 14 - enlarged 5:1
9x14
Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both.
< / = = the source gives only that limit, modeled at it. ref = reference.
L2 = the standard itself (or its complete free preview, or the maker's drawing).
L1 = two or more independent sources agree: the release gate.
LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how.
House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L2 3-111.
Notes
L = 10 shown Sizes are d x D: normal and thin-wall series side by side, as in Table 1.
lengths 6-14 L: the size's lengths in Table 1, each its own file; the views show the middle one. C is within the owner's quarter-wall cap at every size here, so it is modeled as given.
C <0.4,a = 45°
View from above
TITLE
'? CommunityCAD Size drawing, 9x14
STANDARDS FOLLOWED FAMILY / DETAIL
ISO 2795:2020 Sintered bronze bush, cylindrical - 9x14 SHEET REV SCALE PROJECTION UNITS CC-1S802795-SZ-9x14 A 5:11 € Dimensions in mm
SPEC VERSION LICENSE PAGE
70b2bf787ea8F07904ce030af50bcaf231F0c68F CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.