7x11 Sintered Bronze Bushing (Oilite Bushing), ISO 2795

STEP · STL Supports CommunityCAD0 downloads
7x11 Sintered Bronze Bushing (Oilite Bushing), ISO 2795
1 / 7

7x11 Sintered Bronze Bushing (Oilite Bushing), ISO 2795

For a 7 mm shaft in an 11 mm housing bore, this 7x11 sintered bronze bushing (ISO 2795) presses in and runs on the oil in its sintered wall. Modeled as 3 lengths from 5 to 10 mm, each as simplified STEP.

7x11 × 8 sintered bronze bushing, ISO 2795

How these parts are made, and what the levels mean: read the method

  • Also searched as: 7x11 bushing, 7x11 x 5 to 7x11 x 10 bushings
  • Model id: iso2795-c-7x11
  • Standard: ISO 2795:2020 · size 7x11

Lengths

Length (mm)Part keySimplified
5iso2795-c-7x11x5STEP
8iso2795-c-7x11x8STEP
10iso2795-c-7x11x10STEP

Dimensions

Dimension symbols for 7x11 sintered bronze bushings (ISO 2795)

SymbolNameminnommaxModeledRuleLevel
dInside diameter77nominalL2
DOutside diameter1111nominalL2
CChamfer, maximum0.30.3single limit (max), modeled at the limitL2
C_angleChamfer angle4545nominalL1

Drawing

Drawing of the 7x11 sintered bronze bushing with its values (ISO 2795)

As a PDF: CC-ISO2795-SZ-7x11.pdf.

The 7x11 sintered bronze bushing beside the 6x9 and the 7x10

The 7x11 is number 11 of the 20 ISO 2795 sintered bronze bushings published here, listed from 2x5 to 12x16.

  • Inside diameter (d): 7 mm on the 7x11 sintered bronze bushing, against 6 mm on the 6x9 and 7 mm on the 7x10.
  • Outside diameter (D): 11 mm on the 7x11 sintered bronze bushing, against 9 mm on the 6x9 and 10 mm on the 7x10.
  • Chamfer, maximum (C): up to 0.3 mm on the 7x11 sintered bronze bushing, the same on the 6x9 and the 7x10.
  • Chamfer angle (C_angle): 45° on the 7x11 sintered bronze bushing, the same on the 6x9 and the 7x10.

Other sizes

Documents

Sources

bowman-iso2795-plain, iso2795-2020-sample, iso2795-2020-sample-figures, selfoil-iso2795-plain. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO2795-SZ-7x11.pdf

ISO 2795 sintered bronze bush, cylindrical, 7xT1 Size drawing - 7x11 values on the views - L = 8 shown; lengths 5, 8, 10 - enlarged 5:1 7x11 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = =…

View full datasheet →

docs/CC-ISO2795-DS-7x11.pdf

* CC-1S02795-DS-7x11 revA '?) CommunityCAD Size datasheet - 7x11 ISO 2795 7x11 sintered bronze bush Size datasheet: this bush's values with their levels, conventions and sources. For 7 mm shafts ina 11mm housing bore Part key iso2795-c-7x11x<L> Files 3 STEP AP214 (simplified), one per length…

View full datasheet →