9x12 Sintered Bronze Bushing (Oilite Bushing), ISO 2795
The 9x12 sintered bronze bushing (ISO 2795) has a 9 mm bore and a 12 mm outside diameter, oil impregnated and press-fitted. Get it as 3 lengths from 6 to 14 mm, each as simplified STEP.

How these parts are made, and what the levels mean: read the method
- Also searched as: 9x12 bushing, 9x12 x 6 to 9x12 x 14 bushings
- Model id:
iso2795-c-9x12
- Standard: ISO 2795:2020 · size 9x12
Lengths
| Length (mm) | Part key | Simplified |
|---|
| 6 | iso2795-c-9x12x6 | STEP |
| 10 | iso2795-c-9x12x10 | STEP |
| 14 | iso2795-c-9x12x14 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| d | Inside diameter | | 9 | | 9 | nominal | L2 |
| D | Outside diameter | | 12 | | 12 | nominal | L2 |
| C | Chamfer, maximum | | | 0.3 | 0.3 | single limit (max), modeled at the limit | L2 |
| C_angle | Chamfer angle | | 45 | | 45 | nominal | L1 |
Drawing

As a PDF: CC-ISO2795-SZ-9x12.pdf.
The 9x12 sintered bronze bushing beside the 9x14 and the 10x16
The 9x12 is number 16 of the 20 ISO 2795 sintered bronze bushings published here, listed from 2x5 to 12x16.
- Inside diameter (d): 9 mm on the 9x12 sintered bronze bushing, against 9 mm on the 9x14 and 10 mm on the 10x16.
- Outside diameter (D): 12 mm on the 9x12 sintered bronze bushing, against 14 mm on the 9x14 and 16 mm on the 10x16.
- Chamfer, maximum (C): up to 0.3 mm on the 9x12 sintered bronze bushing, against up to 0.4 mm on the 9x14 and up to 0.4 mm on the 10x16.
- Chamfer angle (C_angle): 45° on the 9x12 sintered bronze bushing, the same on the 9x14 and the 10x16.
Other sizes
Documents
Sources
bowman-iso2795-plain, iso2795-2020-sample, iso2795-2020-sample-figures, selfoil-iso2795-plain. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.