8x12 Sintered Bronze Bushing (Oilite Bushing), ISO 2795

STEP · STL Supports CommunityCAD0 downloads
8x12 Sintered Bronze Bushing (Oilite Bushing), ISO 2795
1 / 7

8x12 Sintered Bronze Bushing (Oilite Bushing), ISO 2795

The 8x12 sintered bronze bushing (ISO 2795) has an 8 mm bore and a 12 mm outside diameter, oil impregnated and press-fitted. Get it as 3 lengths from 6 to 12 mm, each as simplified STEP.

8x12 × 8 sintered bronze bushing, ISO 2795

How these parts are made, and what the levels mean: read the method

  • Also searched as: 8x12 bushing, 8x12 x 6 to 8x12 x 12 bushings
  • Model id: iso2795-c-8x12
  • Standard: ISO 2795:2020 · size 8x12

Lengths

Length (mm)Part keySimplified
6iso2795-c-8x12x6STEP
8iso2795-c-8x12x8STEP
12iso2795-c-8x12x12STEP

Dimensions

Dimension symbols for 8x12 sintered bronze bushings (ISO 2795)

SymbolNameminnommaxModeledRuleLevel
dInside diameter88nominalL2
DOutside diameter1212nominalL2
CChamfer, maximum0.30.3single limit (max), modeled at the limitL2
C_angleChamfer angle4545nominalL1

Drawing

Drawing of the 8x12 sintered bronze bushing with its values (ISO 2795)

As a PDF: CC-ISO2795-SZ-8x12.pdf.

The 8x12 sintered bronze bushing beside the 7x10 and the 8x11

The 8x12 is number 13 of the 20 ISO 2795 sintered bronze bushings published here, listed from 2x5 to 12x16.

  • Inside diameter (d): 8 mm on the 8x12 sintered bronze bushing, against 7 mm on the 7x10 and 8 mm on the 8x11.
  • Outside diameter (D): 12 mm on the 8x12 sintered bronze bushing, against 10 mm on the 7x10 and 11 mm on the 8x11.
  • Chamfer, maximum (C): up to 0.3 mm on the 8x12 sintered bronze bushing, the same on the 7x10 and the 8x11.
  • Chamfer angle (C_angle): 45° on the 8x12 sintered bronze bushing, the same on the 7x10 and the 8x11.

Other sizes

Documents

Sources

bowman-iso2795-plain, iso2795-2020-sample, iso2795-2020-sample-figures, selfoil-iso2795-plain. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO2795-SZ-8x12.pdf

ISO 2795 sintered bronze bush, cylindrical, 8x12 Size drawing - 8x12 values on the views - L = 8 shown; lengths 6, 8, 12 - enlarged 5:1 8x12 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = =…

View full datasheet →

docs/CC-ISO2795-DS-8x12.pdf

* CC-1S02795-DS-8x12 revA '?) CommunityCAD Size datasheet - 8x12 ISO 2795 8x12 sintered bronze bush Size datasheet: this bush's values with their levels, conventions and sources. For 8 mm shafts ina 12 mm housing bore Part key iso2795-c-8x12x<L> Files 3 STEP AP214 (simplified), one per length…

View full datasheet →