6200, 6200-2Z, 6200-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
6200, 6200-2Z, 6200-2RS Ball Bearing, ISO 15
1 / 7

6200, 6200-2Z, 6200-2RS Ball Bearing, ISO 15

For a 10 mm shaft and a 30 mm housing bore, the 6200 ball bearing (ISO 15) is 9 mm wide. Modeled as simplified STEP files.

6200 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 6200 bearing, 6200-2Z bearing, 6200-2RS bearing
  • Model id: iso15-6200
  • Standard: ISO 15 · size 6200

Versions

DesignationWhat differsPart keySimplified
6200openiso15-6200STEP
6200-2Z2Z (shielded)iso15-6200-2zSTEP
6200-2RS2RS (sealed)iso15-6200-2rsSTEP

Dimensions

Dimension symbols for 6200 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter1010nominalL1
DOutside diameter3030nominalL1
BWidth99nominalL1
rChamfer dimension0.60.6single limit (min), modeled at the limitL1

Drawing

Drawing of the 6200 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-6200.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 5600 N
  • Basic Load Ratings, C0r: 2390 N
  • Limiting Speeds, Grease: 28000 min-1
  • Limiting Speeds, Oil (Oil-bath): 34000 min-1

The 6200 ball bearing beside the 6000 and the 6300

The 6200 is number 28 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 10 mm on the 6200 ball bearing, the same on the 6000 and the 6300.
  • Outside diameter (D): 30 mm on the 6200 ball bearing, against 26 mm on the 6000 and 35 mm on the 6300.
  • Width (B): 9 mm on the 6200 ball bearing, against 8 mm on the 6000 and 11 mm on the 6300.
  • Chamfer dimension (r): at least 0.6 mm on the 6200 ball bearing, against at least 0.3 mm on the 6000 and at least 0.6 mm on the 6300.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-6200.pdf

* CC-1S015-DS-6200 revA '?) CommunityCAD Size datasheet - 6200 ISO 15 6200 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 10 mm shafts Part keys iso15-6200, iso15-6200-2z, = _ Files 3 STEP AP214…

View full datasheet →

docs/CC-ISO15-SZ-6200.pdf

ISO 15 single row deep groove ball bearings, 6200 Size drawing - 6200 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 2:1 D=30 View from above Bearing 6200 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its…

View full datasheet →