6004, 6004-2Z, 6004-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
6004, 6004-2Z, 6004-2RS Ball Bearing, ISO 15
1 / 7

6004, 6004-2Z, 6004-2RS Ball Bearing, ISO 15

The 6004 ball bearing (ISO 15) has a 20 mm bore, a 42 mm outside diameter and a width of 12 mm. Get it as simplified STEP files.

6004 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 6004 bearing, 6004-2Z bearing, 6004-2RS bearing
  • Model id: iso15-6004
  • Standard: ISO 15 · size 6004

Versions

DesignationWhat differsPart keySimplified
6004openiso15-6004STEP
6004-2Z2Z (shielded)iso15-6004-2zSTEP
6004-2RS2RS (sealed)iso15-6004-2rsSTEP

Dimensions

Dimension symbols for 6004 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter2020nominalL1
DOutside diameter4242nominalL1
BWidth1212nominalL1
rChamfer dimension0.60.6single limit (min), modeled at the limitL1

Drawing

Drawing of the 6004 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-6004.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 10300 N
  • Basic Load Ratings, C0r: 5000 N
  • Limiting Speeds, Grease: 20000 min-1
  • Limiting Speeds, Oil (Oil-bath): 24000 min-1

The 6004 ball bearing beside the 16004 and the 6204

The 6004 is number 51 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 20 mm on the 6004 ball bearing, the same on the 16004 and the 6204.
  • Outside diameter (D): 42 mm on the 6004 ball bearing, against 42 mm on the 16004 and 47 mm on the 6204.
  • Width (B): 12 mm on the 6004 ball bearing, against 8 mm on the 16004 and 14 mm on the 6204.
  • Chamfer dimension (r): at least 0.6 mm on the 6004 ball bearing, against at least 0.3 mm on the 16004 and at least 1 mm on the 6204.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb, skf-17000-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-6004.pdf

. CC-1S015-DS-6004 revA '?) CommunityCAD Size datasheet - 6004 ISO 15 6004 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 20 mm shafts Part keys iso15-6004, iso15-6004-2z, iso15-6004-2rs Files 3 STEP…

View full datasheet →

docs/CC-ISO15-SZ-6004.pdf

ISO 15 single row deep groove ball bearings, 6004 Size drawing - 6004 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 2:1 View from above Bearing 6004 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its…

View full datasheet →