ISO 15 single row deep groove ball bearings, 6000
Size drawing - 6000 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 5:1
Bearing 6000 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and marked *.
c = a source value was corrected; the datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule.
This size's values: L1 4.
Notes
2 r: the sources give r_s min only; modeled at that limit.
Ring corners, faces and the shield recess are house conventions, sheet DO2.
TITLE
'? CommunityCAD Size drawing, 6000
STANDARDS FOLLOWED FAMILY / DETAIL ISO 15 (edition not printed by the sources) Deep groove ball bearing - 6000
SHEET REV SCALE PROJECTION UNITS
D=26 CC-1S015-SZ-6000 A 5:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 6aab1ad286d2ad639684ae08e37afFb4700F Fd8F CC-BY 4.0 IronPixel Labs LLC 1/1
View from above
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.