40x80 Aluminium Extrusion, 40 and 45 slot 10

The 40x80 aluminium extrusion (40 and 45 slot 10) measures 40 mm × 80 mm; its slots open 10 mm wide and its cores are bored 10.5 mm. Get it as 14 lengths from 100 to 2000 mm, each as simplified and detailed STEP.

How these parts are made, and what the levels mean: read the method

• Also searched as: 40x80 extrusion, 40x80 x 100 to 40x80 x 2000 extrusions
• Model id: extrusions-slot10-40x80
• Standard: 40 and 45 slot 10 · size 40x80

Lengths

Length (mm)	Part key	Simplified	Detailed
100	extrusions-slot10-40x80x100	STEP	STEP
150	extrusions-slot10-40x80x150	STEP	STEP
200	extrusions-slot10-40x80x200	STEP	STEP
250	extrusions-slot10-40x80x250	STEP	STEP
300	extrusions-slot10-40x80x300	STEP	STEP
350	extrusions-slot10-40x80x350	STEP	STEP
400	extrusions-slot10-40x80x400	STEP	STEP
450	extrusions-slot10-40x80x450	STEP	STEP
500	extrusions-slot10-40x80x500	STEP	STEP
600	extrusions-slot10-40x80x600	STEP	STEP
750	extrusions-slot10-40x80x750	STEP	STEP
1000	extrusions-slot10-40x80x1000	STEP	STEP
1500	extrusions-slot10-40x80x1500	STEP	STEP
2000	extrusions-slot10-40x80x2000	STEP	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
a	Profile width		40		40	nominal	L1
h	Profile height		80		80	nominal	L1
b	Slot opening		10		10	nominal	L1
c	Slot undercut width		20		20	nominal	L0 (nom: one source)
t	Lip thickness		5.5		5.5	nominal	L0 (nom: one source)
u	Cavity depth behind the lip		7		7	nominal	L0 (nom: one source)
d	Core bore diameter		10.5		10.5	nominal	L0 (nom: one source)
r	Outside corner radius		3		3	nominal	L0 (nom: one source)
p	Slot pitch		40		40	nominal	L0 (nom: one source)
s	Corner tube width		6		6	nominal	L0 (nom: one source)
f	Corner tube wall		2		2	nominal	L0 (nom: one source)
v	Wall between slots		3		3	nominal	L0 (nom: one source)
A	Sectional area		1109		1109	nominal	L0 (nom: one source)

Drawing

As a PDF: CC-EXTRS10-SZ-40x80.pdf.

The 40x80 aluminium extrusion beside the 40x40 and the 45x45

The 40x80 is number 2 of the 6 40 and 45 slot 10 aluminium extrusions published here, listed from 40x40 to 90x90.

• Profile width (a): 40 mm on the 40x80 aluminium extrusion, against 40 mm on the 40x40 and 45 mm on the 45x45.
• Profile height (h): 80 mm on the 40x80 aluminium extrusion, against 40 mm on the 40x40 and 45 mm on the 45x45.
• Slot opening (b): 10 mm on the 40x80 aluminium extrusion, the same on the 40x40 and the 45x45.
• Slot undercut width (c): 20 mm on the 40x80 aluminium extrusion, the same on the 40x40 and the 45x45.
• Lip thickness (t): 5.5 mm on the 40x80 aluminium extrusion, against 5.5 mm on the 40x40 and 6 mm on the 45x45.
• Cavity depth behind the lip (u): 7 mm on the 40x80 aluminium extrusion, the same on the 40x40 and the 45x45.
• Core bore diameter (d): 10.5 mm on the 40x80 aluminium extrusion, against 10.5 mm on the 40x40 and 12.5 mm on the 45x45.
• Outside corner radius (r): 3 mm on the 40x80 aluminium extrusion, the same on the 40x40 and the 45x45.

Other sizes

• One size smaller: 40x40 Aluminium Extrusion, 40 and 45 slot 10, 40 mm × 40 mm, 10 mm slot.
• One size larger: 45x45 Aluminium Extrusion, 40 and 45 slot 10, 45 mm × 45 mm, 10 mm slot.

Documents

• CC-EXTRS10-DS-40x80.pdf: 40x80 datasheet: values with levels, lengths, sources
• CC-EXTRS10-SZ-40x80.pdf: 40x80 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

misumi-hfs8, motedis-b10-pages. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.