40 and 45 slot 10 aluminium extrusion, per Misumi HFS8, 40x80
Size drawing - 40x80 values on the views - enlarged 2:1
Source levels Sym. | Dimension (mi Main value = the modeled value (nominal, else the middle of min-max). Profile width Grey under a value = its min-max, where the source gives both. < / = = the source gives only that limit, modeled at it. ref = reference. L2 = the standard itself (or its complete free preview, or the maker's drawing). L1 = two or more independent sources agree: the release gate. LO = one source only: printed amber and Slot undercut width marked *
Profile height
Slot pitch (cell side)
r = 3* (4 corners) Slot opening
c = a source value was corrected; the Lip thickness 5 datasheet says how. House convention = a detail no source dimensions, drawn to a stated house rule. This size's values: L1 3 - LO 10. Notes L1 here = two makers agree; value = the maker's drawn nominal. Core width * = Misumi HFS8's drawing alone (as #958 item @ d = 10.5* (each core) 1A). Core bore diameter = grey = derived: e = t + u (the slot floor); p=a for one cell.
Lip to core face
w = 2h (diagonal web) Slot depth
Outside corner radius 3x h grey = house rule: core k = d + 2w, or out to the slot floor (ADR 0089 row 2);
bx web w as thick as the corner tube wall f (row 3).
Modeled area: the detailed section, checked
against A within 12 % (ADR 0089).
ILLUSTRATIVE INTERIOR - house rule from
Misumi HFS8's drawn values (ADR 0089)
Corner tube side
Corner tube wall 2x
Wall between two slots. 3x
Diagonal web thickness 2h
Sectional area, mm? (catalog) 1109*
Modeled area, mm? (detailed) 1162 (+4.8 %)
corner tube (4)
TITLE
Detailed level - 40x80 - 2:1 '? CommunityCAD Size drawing, 40x80
interior illustrative (ADR 0089)
STANDARDS FOLLOWED FAMILY / DETAIL
No published standard (ADR 0034) - per Misumi HFS8 - Motedis, Rexroth Aluminium extrusion - 40x80
SHEET REV SCALE PROJECTION UNITS CC-EXTRS10-SZ- 40x80 A 2:1 € Dimensions in mm SPEC VERSION LICENSE PAGE 6aab1ad286d2ad639684ae08e37afFb4700F Fd8F CC-BY 4.0 IronPixel Labs LLC 1/1
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.