80x80 Aluminium Extrusion, 40 and 45 slot 10

The 80x80 aluminium extrusion (40 and 45 slot 10) measures 80 mm × 80 mm; its slots open 10 mm wide and its cores are bored 6.8 mm. Get it as 14 lengths from 100 to 2000 mm, each as simplified and detailed STEP.

How these parts are made, and what the levels mean: read the method

• Also searched as: 80x80 extrusion, 80x80 x 100 to 80x80 x 2000 extrusions
• Model id: extrusions-slot10-80x80
• Standard: 40 and 45 slot 10 · size 80x80

Lengths

Length (mm)	Part key	Simplified	Detailed
100	extrusions-slot10-80x80x100	STEP	STEP
150	extrusions-slot10-80x80x150	STEP	STEP
200	extrusions-slot10-80x80x200	STEP	STEP
250	extrusions-slot10-80x80x250	STEP	STEP
300	extrusions-slot10-80x80x300	STEP	STEP
350	extrusions-slot10-80x80x350	STEP	STEP
400	extrusions-slot10-80x80x400	STEP	STEP
450	extrusions-slot10-80x80x450	STEP	STEP
500	extrusions-slot10-80x80x500	STEP	STEP
600	extrusions-slot10-80x80x600	STEP	STEP
750	extrusions-slot10-80x80x750	STEP	STEP
1000	extrusions-slot10-80x80x1000	STEP	STEP
1500	extrusions-slot10-80x80x1500	STEP	STEP
2000	extrusions-slot10-80x80x2000	STEP	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
a	Profile width		80		80	nominal	L1
h	Profile height		80		80	nominal	L1
b	Slot opening		10		10	nominal	L1
c	Slot undercut width		20		20	nominal	L0 (nom: one source)
t	Lip thickness		5.5		5.5	nominal	L0 (nom: one source)
u	Cavity depth behind the lip		7		7	nominal	L0 (nom: one source)
d	Core bore diameter		6.8		6.8	nominal	L0 (nom: one source)
r	Outside corner radius		3		3	nominal	L0 (nom: one source)
p	Slot pitch		40		40	nominal	L0 (nom: one source)
s	Corner tube width		6		6	nominal	L0 (nom: one source)
f	Corner tube wall		2		2	nominal	L0 (nom: one source)
v	Wall between slots		2.5		2.5	nominal	L0 (nom: one source)
A	Sectional area		1691		1691	nominal	L0 (nom: one source)

Drawing

As a PDF: CC-EXTRS10-SZ-80x80.pdf.

The 80x80 aluminium extrusion beside the 45x90 and the 90x90

The 80x80 is number 5 of the 6 40 and 45 slot 10 aluminium extrusions published here, listed from 40x40 to 90x90.

• Profile width (a): 80 mm on the 80x80 aluminium extrusion, against 45 mm on the 45x90 and 90 mm on the 90x90.
• Profile height (h): 80 mm on the 80x80 aluminium extrusion, against 90 mm on the 45x90 and 90 mm on the 90x90.
• Slot opening (b): 10 mm on the 80x80 aluminium extrusion, the same on the 45x90 and the 90x90.
• Slot undercut width (c): 20 mm on the 80x80 aluminium extrusion, the same on the 45x90 and the 90x90.
• Lip thickness (t): 5.5 mm on the 80x80 aluminium extrusion, against 6 mm on the 45x90 and 6 mm on the 90x90.
• Cavity depth behind the lip (u): 7 mm on the 80x80 aluminium extrusion, the same on the 45x90 and the 90x90.
• Core bore diameter (d): 6.8 mm on the 80x80 aluminium extrusion, against 12.5 mm on the 45x90 and 6.8 mm on the 90x90.
• Outside corner radius (r): 3 mm on the 80x80 aluminium extrusion, the same on the 90x90.

Other sizes

• One size smaller: 45x90 Aluminium Extrusion, 40 and 45 slot 10, 45 mm × 90 mm, 10 mm slot.
• One size larger: 90x90 Aluminium Extrusion, 40 and 45 slot 10, 90 mm × 90 mm, 10 mm slot.

Documents

• CC-EXTRS10-DS-80x80.pdf: 80x80 datasheet: values with levels, lengths, sources
• CC-EXTRS10-SZ-80x80.pdf: 80x80 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

misumi-hfs8, rexroth-mge-80x80l. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.