90x90 Aluminium Extrusion, 40 and 45 slot 10

Slot opening 10 mm, core bore 6.8 mm, outline 90 mm × 90 mm: the 90x90 aluminium extrusion (40 and 45 slot 10), as 14 lengths from 100 to 2000 mm, each as simplified and detailed STEP.

How these parts are made, and what the levels mean: read the method

• Also searched as: 90x90 extrusion, 90x90 x 100 to 90x90 x 2000 extrusions
• Model id: extrusions-slot10-90x90
• Standard: 40 and 45 slot 10 · size 90x90

Lengths

Length (mm)	Part key	Simplified	Detailed
100	extrusions-slot10-90x90x100	STEP	STEP
150	extrusions-slot10-90x90x150	STEP	STEP
200	extrusions-slot10-90x90x200	STEP	STEP
250	extrusions-slot10-90x90x250	STEP	STEP
300	extrusions-slot10-90x90x300	STEP	STEP
350	extrusions-slot10-90x90x350	STEP	STEP
400	extrusions-slot10-90x90x400	STEP	STEP
450	extrusions-slot10-90x90x450	STEP	STEP
500	extrusions-slot10-90x90x500	STEP	STEP
600	extrusions-slot10-90x90x600	STEP	STEP
750	extrusions-slot10-90x90x750	STEP	STEP
1000	extrusions-slot10-90x90x1000	STEP	STEP
1500	extrusions-slot10-90x90x1500	STEP	STEP
2000	extrusions-slot10-90x90x2000	STEP	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
a	Profile width		90		90	nominal	L1
h	Profile height		90		90	nominal	L1
b	Slot opening		10		10	nominal	L1
c	Slot undercut width		20		20	nominal	L0 (nom: one source)
t	Lip thickness		6		6	nominal	L0 (nom: one source)
u	Cavity depth behind the lip		7		7	nominal	L0 (nom: one source)
d	Core bore diameter		6.8		6.8	nominal	L0 (nom: one source)
r	Outside corner radius		3		3	nominal	L0 (nom: one source)
p	Slot pitch		45		45	nominal	L0 (nom: one source)
s	Corner tube width		9		9	nominal	L0 (nom: one source)
f	Corner tube wall		2.5		2.5	nominal	L0 (nom: one source)
v	Wall between slots		3		3	nominal	L0 (nom: one source)
A	Sectional area		2162		2162	nominal	L0 (nom: one source)

Drawing

As a PDF: CC-EXTRS10-SZ-90x90.pdf.

The 90x90 aluminium extrusion beside the 80x80

The 90x90 is the last of the 6 40 and 45 slot 10 aluminium extrusions published here, listed from 40x40 to 90x90.

• Profile width (a): 90 mm on the 90x90 aluminium extrusion, against 80 mm on the 80x80.
• Profile height (h): 90 mm on the 90x90 aluminium extrusion, against 80 mm on the 80x80.
• Slot opening (b): 10 mm on the 90x90 aluminium extrusion, the same on the 80x80.
• Slot undercut width (c): 20 mm on the 90x90 aluminium extrusion, the same on the 80x80.
• Lip thickness (t): 6 mm on the 90x90 aluminium extrusion, against 5.5 mm on the 80x80.
• Cavity depth behind the lip (u): 7 mm on the 90x90 aluminium extrusion, the same on the 80x80.
• Core bore diameter (d): 6.8 mm on the 90x90 aluminium extrusion, the same on the 80x80.
• Outside corner radius (r): 3 mm on the 90x90 aluminium extrusion, the same on the 80x80.

Other sizes

• One size smaller: 80x80 Aluminium Extrusion, 40 and 45 slot 10, 80 mm × 80 mm, 10 mm slot.

Documents

• CC-EXTRS10-DS-90x90.pdf: 90x90 datasheet: values with levels, lengths, sources
• CC-EXTRS10-SZ-90x90.pdf: 90x90 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

misumi-hfs8, motedis-b10-pages. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.