45x90 Aluminium Extrusion, 40 and 45 slot 10

A 45x90 aluminium extrusion (40 and 45 slot 10), 45 mm by 90 mm over its faces, with slots 10 mm wide at the mouth and a 12.5 mm bore through each core. Here in 14 lengths from 100 to 2000 mm, each as simplified and detailed STEP.

How these parts are made, and what the levels mean: read the method

• Also searched as: 45x90 extrusion, 45x90 x 100 to 45x90 x 2000 extrusions
• Model id: extrusions-slot10-45x90
• Standard: 40 and 45 slot 10 · size 45x90

Lengths

Length (mm)	Part key	Simplified	Detailed
100	extrusions-slot10-45x90x100	STEP	STEP
150	extrusions-slot10-45x90x150	STEP	STEP
200	extrusions-slot10-45x90x200	STEP	STEP
250	extrusions-slot10-45x90x250	STEP	STEP
300	extrusions-slot10-45x90x300	STEP	STEP
350	extrusions-slot10-45x90x350	STEP	STEP
400	extrusions-slot10-45x90x400	STEP	STEP
450	extrusions-slot10-45x90x450	STEP	STEP
500	extrusions-slot10-45x90x500	STEP	STEP
600	extrusions-slot10-45x90x600	STEP	STEP
750	extrusions-slot10-45x90x750	STEP	STEP
1000	extrusions-slot10-45x90x1000	STEP	STEP
1500	extrusions-slot10-45x90x1500	STEP	STEP
2000	extrusions-slot10-45x90x2000	STEP	STEP

Dimensions

Symbol	Name	min	nom	max	Modeled	Rule	Level
a	Profile width		45		45	nominal	L1
h	Profile height		90		90	nominal	L1
b	Slot opening		10		10	nominal	L1
c	Slot undercut width		20		20	nominal	L0 (nom: one source)
t	Lip thickness		6		6	nominal	L0 (nom: one source)
u	Cavity depth behind the lip		7		7	nominal	L0 (nom: one source)
d	Core bore diameter		12.5		12.5	nominal	L0 (nom: one source)
p	Slot pitch		45		45	nominal	L0 (nom: one source)
s	Corner tube width		7.5		7.5	nominal	L0 (nom: one source)
f	Corner tube wall		2.5		2.5	nominal	L0 (nom: one source)
v	Wall between slots		3		3	nominal	L0 (nom: one source)
A	Sectional area		1534		1534	nominal	L0 (nom: one source)

Drawing

As a PDF: CC-EXTRS10-SZ-45x90.pdf.

The 45x90 aluminium extrusion beside the 45x45 and the 80x80

The 45x90 is number 4 of the 6 40 and 45 slot 10 aluminium extrusions published here, listed from 40x40 to 90x90.

• Profile width (a): 45 mm on the 45x90 aluminium extrusion, against 45 mm on the 45x45 and 80 mm on the 80x80.
• Profile height (h): 90 mm on the 45x90 aluminium extrusion, against 45 mm on the 45x45 and 80 mm on the 80x80.
• Slot opening (b): 10 mm on the 45x90 aluminium extrusion, the same on the 45x45 and the 80x80.
• Slot undercut width (c): 20 mm on the 45x90 aluminium extrusion, the same on the 45x45 and the 80x80.
• Lip thickness (t): 6 mm on the 45x90 aluminium extrusion, against 6 mm on the 45x45 and 5.5 mm on the 80x80.
• Cavity depth behind the lip (u): 7 mm on the 45x90 aluminium extrusion, the same on the 45x45 and the 80x80.
• Core bore diameter (d): 12.5 mm on the 45x90 aluminium extrusion, against 12.5 mm on the 45x45 and 6.8 mm on the 80x80.
• Slot pitch (p): 45 mm on the 45x90 aluminium extrusion, against 40 mm on the 80x80.

Other sizes

• One size smaller: 45x45 Aluminium Extrusion, 40 and 45 slot 10, 45 mm × 45 mm, 10 mm slot.
• One size larger: 80x80 Aluminium Extrusion, 40 and 45 slot 10, 80 mm × 80 mm, 10 mm slot.

Documents

• CC-EXTRS10-DS-45x90.pdf: 45x90 datasheet: values with levels, lengths, sources
• CC-EXTRS10-SZ-45x90.pdf: 45x90 drawing: this size's values on the views
• parts.json: the part record of every length (the platform contract)

Sources

misumi-hfs8, motedis-b10-pages. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.