30 B-type slot 8 single Extrusion Corner Bracket datasheet (PDF)

Datasheet — 30 B-type slot 8 single Extrusion Corner Bracket by Milo

Open the PDF
30 B-type slot 8 single Extrusion Corner BracketGet the CAD model30 B-type slot 8 single Extrusion Corner BracketCC-CORNBRKT-DS-b8-single.pdf

Text of this datasheet

+ CC-CORNBRKT-DS-b8-single rev A 0 CommunityCAD Size datasheet - b8-single

30 B-type slot 8 single corner bracket

Size datasheet: this size's values with their levels, conventions and sources.

For 30 B-type slot 8 aluminium extrusions Part key extrusion-corner-brackets-b8- single Files 1 STEP AP214 (simplified) b8-single, face, 1:1 b8-single, side, 0.5:1 (hidden lines dashed) Sym. Dimension Value Level L Leg length 30x Lo -1 h Upright leg length 30* lo. 1 w Width 20* Lo -1 t Wall thickness Gx Lo -1 tu Upright wall thickness 4.5* Lo: 1 d Hole diameter 6.3% Lo -1 n Number of holes Qk Lo -1 k Key height 1* lo. 1 ex Hole row on the first leg 18* Lo: 1 ez Hole row on the upright leg 15* lo. 1 ey Hole column from the side 10* Lo: 1

Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.

No published standard (makers' drawings) Page 1/2 Extrusion corner bracket - b8-single - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.

---

'?) CommunityCAD CC-CORNBRKT-DS-b8-single rev A

Size datasheet - b8-single

Conventions

« Casting: Side walls of the wall thickness, an inside fillet, key width and length and, on the slot 10 and 45 brackets, a curved diagonal: illustrative, not any maker's design.

« Mark: The CommunityCAD mark recessed 0.3 mm in an outside side wall. Illustrative.

« Values: No published standard: every maker casts its own bracket, so each size is the reference maker's own casting (Misumi, OpenBuilds, item), single source. item's sheets give only the outline and holes: its wall and key are house proportions, its hole ISO 273 medium for M8. On the 20 B-type slot 6 double, Misumi's drawing alone shows which holes sit on its rows. The two readings disagreed, and the owner accepted this layout: 4 holes on the first leg in two rows, 2 on the upright in one, no centre column.

« \V-slot holes: OpenBuilds' drawing gives the holes of the 20 V-slot bracket no position, so they sit at the middle of the leg and of the width, a rule rather than a maker's dimension.

¢ Finish: Cast aluminium, the reference part's finish: render and metadata only. First leg's profile face at Z = 0, the upright's at X = 0, the keys beyond them.

Sources Source Publisher Retrieved sha256 misumi-cast-brackets MISUMI 2026-10-30 7b0132a5b737 (kept outside the repo)

The whole series (verification map, corrections, drawings): CC-CORNBRKT-DS.

No published standard (makers' drawings) Page 2/2 Extrusion corner bracket - b8-single - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b

Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.