40 slot 10 l-3 Extrusion Joining Plate

STEP · STL Supports CommunityCAD0 downloads
40 slot 10 l-3 Extrusion Joining Plate
1 / 6

40 slot 10 l-3 Extrusion Joining Plate

The 40 slot 10 l-3 extrusion joining plate is 60 mm long, 28 mm wide and 3.2 mm thick, with 3 holes of 9 mm. Here in simplified STEP files.

40 slot 10 l-3 extrusion joining plate, Extrusion joining plate

How these parts are made, and what the levels mean: read the method

  • Also known as: 40 slot 10 l-3 joining strip, 40 slot 10 l-3 corner plate, 40 slot 10 l-3 T plate, 40 slot 10 l-3 flat connector plate
  • Model id: extrusion-joining-plates-s10-l-3
  • Standard: Extrusion joining plate · size 40 slot 10 l-3

Files

Part keySimplified
extrusion-joining-plates-s10-l-3STEP

Dimensions

Dimension symbols for 40 slot 10 l-3 extrusion joining plates (Extrusion joining plate)

SymbolNameminnommaxModeledRuleLevel
lLength6060nominalL0 (nom: one source)
wLeg width2828nominalL0 (nom: one source)
tThickness3.23.2nominalL0 (nom: one source)
dHole diameter99nominalL0 (nom: one source)
nNumber of holes33nominalL0 (nom: one source)
pHole spacing3636nominalL0 (nom: one source)
eHole to end1010nominalL0 (nom: one source)
cCorner chamfer55nominalL0 (nom: one source)

Drawing

Drawing of the 40 slot 10 l-3 extrusion joining plate with its values (Extrusion joining plate)

As a PDF: CC-JOINPLATE-SZ-s10-l-3.pdf.

The 40 slot 10 l-3 extrusion joining plate beside the 40 slot 10 inline-4 and the 40 slot 10 l-4

The 40 slot 10 l-3 is number 17 of the 21 Extrusion joining plate extrusion joining plates published here, listed from 20 B-type slot 6 inline-2 to 45 slot 10 inline-4.

  • Length (l): 60 mm on the 40 slot 10 l-3 extrusion joining plate, against 155 mm on the 40 slot 10 inline-4 and 85 mm on the 40 slot 10 l-4.
  • Leg width (w): 28 mm on the 40 slot 10 l-3 extrusion joining plate, against 35 mm on the 40 slot 10 inline-4 and 28 mm on the 40 slot 10 l-4.
  • Thickness (t): 3.2 mm on the 40 slot 10 l-3 extrusion joining plate, the same on the 40 slot 10 inline-4 and the 40 slot 10 l-4.
  • Hole diameter (d): 9 mm on the 40 slot 10 l-3 extrusion joining plate, the same on the 40 slot 10 inline-4 and the 40 slot 10 l-4.
  • Number of holes (n): 3 on the 40 slot 10 l-3 extrusion joining plate, against 4 on the 40 slot 10 inline-4 and 4 on the 40 slot 10 l-4.
  • Hole spacing (p): 36 mm on the 40 slot 10 l-3 extrusion joining plate, against 40 mm on the 40 slot 10 inline-4 and 28 mm on the 40 slot 10 l-4.
  • Hole to end (e): 10 mm on the 40 slot 10 l-3 extrusion joining plate, the same on the 40 slot 10 l-4.
  • Corner chamfer (c): 5 mm on the 40 slot 10 l-3 extrusion joining plate, the same on the 40 slot 10 l-4.

Other sizes

Conventions

  • Simplified only: one solid. STEP AP214, millimetres, the face on the profile at Z = 0, the outer face at Z = t; inline plates along +X from a corner, L plates with the outer corner at the origin, T plates with the bar's outer edge on Y = 0.
  • The CommunityCAD mark recessed 0.3 mm in the outer face, clear of holes and edges, illustrative.

Documents

Sources

misumi-sheet-metal-plates. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-JOINPLATE-DS-s10-l-3.pdf

CC-JOINPLATE-DS-s10-1-3 revA Size datasheet - s10-I-3 '?) CommunityCAD AO slot 10 L plate, 3 holes (extrusion joining plate) Size datasheet: this size's values with their levels, conventions and sources. O For joining 40 slot 10 extrusions (NY Part key extrusion-joining-plates-s10-I-3 ———ee Files…

View full datasheet →

docs/CC-JOINPLATE-SZ-s10-l-3.pdf

Extrusion joining plate, inline, Land T, s10-I-3 Size drawing - s10-I-3 values on the views - enlarged 2:1 c = 5* x 45° Leg width Thickness Hole diameter Number of holes Hole spacing Hole to end Corner chamfer holes: n = 3*, d = 9* Source levels Main value = the modeled value (nominal, else the…

View full datasheet →