CC-JOINPLATE-DS-vs-1-5 revA Size datasheet - vs-I-5
'?) CommunityCAD
20 V-slot L plate, 5 holes (extrusion joining plate)
Size datasheet: this size's values with their levels, conventions and sources.
e) For joining 20 V-slot extrusions Part key extrusion-joining-plates-vs-I-5 —a Files 1 STEP AP214 (simplified) vs-I-5, outer face, 0.5:1 vs-I-5, edge, 0.5:1 (hidden lines dashed)
Sym. Dimension Value Level
1 Length 60* Lo-1
w Leg width 20* LO: 1
t Thickness 4x LO: 1
d Hole diameter 5.10* LO: 1
n Number of holes o* lo -1
p Hole spacing 20* lo-41
g Hole to outer edge 10* Lo-1
02 Second hole ordinate 30* Lo-1
03 Third hole ordinate 50x* lo -1
q2 Upper hole ordinate 30% lo-41
q3 Top hole ordinate 50* lo-41
Modeled value: nominal, else the midpoint of min-max. < / 2: only that limit is given. * amber: one source (LO). c: a source value was corrected. Level - independent sources.
No published standard (makers' drawings) Page 1/2 Extrusion joining plate - vs-I-5 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
---
CC-JOINPLATE-DS-vs-1-5 revA Size datasheet - vs-I-5
'?) CommunityCAD
Conventions
« House mark: The CommunityCAD mark recessed 0.3 mm into the outer face on its largest hole-free square (an L or T plate's corner, an inline plate's middle), clear of every hole and edge by one plate thickness; illustrative.
« Edges: Radius r at an inline plate's four corners and the 45° chamfer c at the outside corners Misumi chamfers, as drawn; every other edge sharp, including the hole edges and the inside corners. No countersinks, no markings.
e Values: No published standard: every plate is its reference maker's own design (Misumi HPT for B-type slot 6 and 8 and slot 10, OpenBuilds for V-slot), placed as its drawing places it; single source (LO, amber) unless a second maker states the same value. Hole positions, width and hole size are checked against the profile.
e Material: Each plate in its reference part's material, render and metadata only: Misumi's chromate-plated steel, OpenBuilds' anodised aluminium.
Sources Source Publisher Retrieved sha256 openbuilds-joining-plates OpenBuilds (copy hosted on GitHub by eric-wieser/2.12-robot) 2026-10-29 2245be0c8d58 ooznest-pLlate-pages Ooznest 2026-10-29 feOb3dea4577
The whole series (verification map, corrections, drawings): CC-JOINPLATE-DS.
No published standard (makers' drawings) Page 2/2 Extrusion joining plate - vs-I-5 - Dimensions in mm - CC-BY 4.0, lronPixel Labs LLC spec 304229b833a653b73db51178a38d40486ee7c36b
Modeled from cited sources; not certified. Found an error? Use the feedback section on the part page.
