20 V-slot strip-2 Extrusion Joining Plate
2 holes of 5.1 mm through a plate 4 mm thick, 40 mm by 18 mm: the 20 V-slot strip-2 extrusion joining plate, as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 20 V-slot strip-2 joining strip, 20 V-slot strip-2 corner plate, 20 V-slot strip-2 T plate, 20 V-slot strip-2 flat connector plate
- Model id:
extrusion-joining-plates-vs-strip-2
- Standard: Extrusion joining plate · size 20 V-slot strip-2
Files
| Part key | Simplified |
|---|
extrusion-joining-plates-vs-strip-2 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| l | Length | | 40 | | 40 | nominal | L0 (nom: one source) |
| w | Leg width | | 18 | | 18 | nominal | L0 (nom: one source) |
| t | Thickness | | 4 | | 4 | nominal | L0 (nom: one source) |
| d | Hole diameter | | 5.1 | | 5.1 | nominal | L0 (nom: one source) |
| n | Number of holes | | 2 | | 2 | nominal | L0 (nom: one source) |
| e | Hole to end | | 10 | | 10 | nominal | L0 (nom: one source) |
| g | Hole to outer edge | | 9 | | 9 | nominal | L0 (nom: one source) |
| o2 | Second hole ordinate | | 30 | | 30 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-JOINPLATE-SZ-vs-strip-2.pdf.
The 20 V-slot strip-2 extrusion joining plate beside the 20 B-type slot 6 t-4 and the 20 V-slot strip-3
The 20 V-slot strip-2 is number 6 of the 21 Extrusion joining plate extrusion joining plates published here, listed from 20 B-type slot 6 inline-2 to 45 slot 10 inline-4.
- Length (l): 40 mm on the 20 V-slot strip-2 extrusion joining plate, against 100 mm on the 20 B-type slot 6 t-4 and 60 mm on the 20 V-slot strip-3.
- Leg width (w): 18 mm on the 20 V-slot strip-2 extrusion joining plate, the same on the 20 B-type slot 6 t-4 and the 20 V-slot strip-3.
- Thickness (t): 4 mm on the 20 V-slot strip-2 extrusion joining plate, against 3.2 mm on the 20 B-type slot 6 t-4 and 4 mm on the 20 V-slot strip-3.
- Hole diameter (d): 5.1 mm on the 20 V-slot strip-2 extrusion joining plate, against 5.5 mm on the 20 B-type slot 6 t-4 and 5.1 mm on the 20 V-slot strip-3.
- Number of holes (n): 2 on the 20 V-slot strip-2 extrusion joining plate, against 4 on the 20 B-type slot 6 t-4 and 3 on the 20 V-slot strip-3.
- Hole to end (e): 10 mm on the 20 V-slot strip-2 extrusion joining plate, the same on the 20 B-type slot 6 t-4 and the 20 V-slot strip-3.
- Hole to outer edge (g): 9 mm on the 20 V-slot strip-2 extrusion joining plate, the same on the 20 B-type slot 6 t-4 and the 20 V-slot strip-3.
- Second hole ordinate (o2): 30 mm on the 20 V-slot strip-2 extrusion joining plate, the same on the 20 V-slot strip-3.
Other sizes
Conventions
- Simplified only: one solid. STEP AP214, millimetres, the face on the profile at Z = 0, the outer face at Z = t; inline plates along +X from a corner, L plates with the outer corner at the origin, T plates with the bar's outer edge on Y = 0.
- The CommunityCAD mark recessed 0.3 mm in the outer face, clear of holes and edges, illustrative.
Documents
Sources
openbuilds-joining-plates. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...