40 slot 10 l-4 Extrusion Joining Plate
4 holes of 9 mm through a plate 3.2 mm thick, 85 mm by 28 mm: the 40 slot 10 l-4 extrusion joining plate, as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 40 slot 10 l-4 joining strip, 40 slot 10 l-4 corner plate, 40 slot 10 l-4 T plate, 40 slot 10 l-4 flat connector plate
- Model id:
extrusion-joining-plates-s10-l-4
- Standard: Extrusion joining plate · size 40 slot 10 l-4
Files
| Part key | Simplified |
|---|
extrusion-joining-plates-s10-l-4 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| l | Length | | 85 | | 85 | nominal | L0 (nom: one source) |
| w | Leg width | | 28 | | 28 | nominal | L0 (nom: one source) |
| t | Thickness | | 3.2 | | 3.2 | nominal | L0 (nom: one source) |
| d | Hole diameter | | 9 | | 9 | nominal | L0 (nom: one source) |
| n | Number of holes | | 4 | | 4 | nominal | L0 (nom: one source) |
| p | Hole spacing | | 28 | | 28 | nominal | L0 (nom: one source) |
| e | Hole to end | | 10 | | 10 | nominal | L0 (nom: one source) |
| g | Hole to outer edge | | 14 | | 14 | nominal | L0 (nom: one source) |
| c | Corner chamfer | | 5 | | 5 | nominal | L0 (nom: one source) |
Drawing

As a PDF: CC-JOINPLATE-SZ-s10-l-4.pdf.
The 40 slot 10 l-4 extrusion joining plate beside the 40 slot 10 l-3 and the 40 slot 10 t-4
The 40 slot 10 l-4 is number 18 of the 21 Extrusion joining plate extrusion joining plates published here, listed from 20 B-type slot 6 inline-2 to 45 slot 10 inline-4.
- Length (l): 85 mm on the 40 slot 10 l-4 extrusion joining plate, against 60 mm on the 40 slot 10 l-3 and 100 mm on the 40 slot 10 t-4.
- Leg width (w): 28 mm on the 40 slot 10 l-4 extrusion joining plate, the same on the 40 slot 10 l-3 and the 40 slot 10 t-4.
- Thickness (t): 3.2 mm on the 40 slot 10 l-4 extrusion joining plate, the same on the 40 slot 10 l-3 and the 40 slot 10 t-4.
- Hole diameter (d): 9 mm on the 40 slot 10 l-4 extrusion joining plate, the same on the 40 slot 10 l-3 and the 40 slot 10 t-4.
- Number of holes (n): 4 on the 40 slot 10 l-4 extrusion joining plate, against 3 on the 40 slot 10 l-3 and 4 on the 40 slot 10 t-4.
- Hole spacing (p): 28 mm on the 40 slot 10 l-4 extrusion joining plate, against 36 mm on the 40 slot 10 l-3.
- Hole to end (e): 10 mm on the 40 slot 10 l-4 extrusion joining plate, the same on the 40 slot 10 l-3 and the 40 slot 10 t-4.
- Hole to outer edge (g): 14 mm on the 40 slot 10 l-4 extrusion joining plate, the same on the 40 slot 10 t-4.
Other sizes
Conventions
- Simplified only: one solid. STEP AP214, millimetres, the face on the profile at Z = 0, the outer face at Z = t; inline plates along +X from a corner, L plates with the outer corner at the origin, T plates with the bar's outer edge on Y = 0.
- The CommunityCAD mark recessed 0.3 mm in the outer face, clear of holes and edges, illustrative.
Documents
Sources
misumi-sheet-metal-plates. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...