16001, 16001-2Z, 16001-2RS Ball Bearing, ISO 15

STEP · STL Supports CommunityCAD0 downloads
16001, 16001-2Z, 16001-2RS Ball Bearing, ISO 15
1 / 7

16001, 16001-2Z, 16001-2RS Ball Bearing, ISO 15

For a 12 mm shaft and a 28 mm housing bore, the 16001 ball bearing (ISO 15) is 7 mm wide. Modeled as simplified STEP files.

16001 ball bearing, ISO 15

How these parts are made, and what the levels mean: read the method

  • Also searched as: 16001 bearing, 16001-2Z bearing, 16001-2RS bearing
  • Model id: iso15-16001
  • Standard: ISO 15 · size 16001

Versions

DesignationWhat differsPart keySimplified
16001openiso15-16001STEP
16001-2Z2Z (shielded)iso15-16001-2zSTEP
16001-2RS2RS (sealed)iso15-16001-2rsSTEP

Dimensions

Dimension symbols for 16001 ball bearings (ISO 15)

SymbolNameminnommaxModeledRuleLevel
dBore diameter1212nominalL1
DOutside diameter2828nominalL1
BWidth77nominalL1
rChamfer dimension0.30.3single limit (min), modeled at the limitL1

Drawing

Drawing of the 16001 ball bearing with its values (ISO 15)

As a PDF: CC-ISO15-SZ-16001.pdf.

Load ratings and speeds

What NSK's web catalogue (nsk-dgbb) lists for its open bearing of this designation. Limiting speeds are for the open bearing; a shielded or sealed bearing has its own, lower ones.

  • Basic Load Ratings, Cr: 5600 N
  • Basic Load Ratings, C0r: 2370 N
  • Limiting Speeds, Grease: 28000 min-1
  • Limiting Speeds, Oil (Oil-bath): 32000 min-1

The 16001 ball bearing beside the 6901 and the 6001

The 16001 is number 32 of the 71 ISO 15 ball bearings published here, listed from 693 to 6306.

  • Bore diameter (d): 12 mm on the 16001 ball bearing, the same on the 6901 and the 6001.
  • Outside diameter (D): 28 mm on the 16001 ball bearing, against 24 mm on the 6901 and 28 mm on the 6001.
  • Width (B): 7 mm on the 16001 ball bearing, against 6 mm on the 6901 and 8 mm on the 6001.
  • Chamfer dimension (r): at least 0.3 mm on the 16001 ball bearing, the same on the 6901 and the 6001.

Other sizes

Documents

Sources

nsk-dgbb, ntn-bearingfinder-dgbb. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-ISO15-DS-16001.pdf

. CC-1S015-DS-16001 rev A '?) CommunityCAD Size datasheet - 16001 ISO 15 16001 deep groove ball bearing Size datasheet: this bearing's values with their levels, conventions and sources, for its open, 2Z and 2RS parts. For 12 mm shafts Part keys iso15-16001, iso15-16001- 2z, iso15-16001-2rs Files 3…

View full datasheet →

docs/CC-ISO15-SZ-16001.pdf

ISO 15 single row deep groove ball bearings, 16001 Size drawing - 16001 values on the views - 2Z shown (open and 2RS share these dimensions) - enlarged 2:1 View from above Bearing 16001 Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its…

View full datasheet →