20x10 Disc Magnet, Neodymium
The 20x10 disc magnet (Neodymium disc magnet) is 20 mm across and 10 mm high, nickel-plated and magnetised through the height. It comes as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 20x10 round magnet, 20x10 rare earth magnet, 20x10 button magnet, 20x10 neodymium magnet
- Model id:
magnets-disc-20x10
- Standard: Neodymium disc magnet · size 20x10
Files
| Part key | Simplified |
|---|
magnets-disc-20x10 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| D | Diameter | | 20 | | 20 | nominal | L1 |
| H | Height | | 10 | | 10 | nominal | L1 |
Drawing

As a PDF: CC-MAGDISC-SZ-20x10.pdf.
What each maker states
- supermagnete lists this size in N42.
- first4magnets lists this size in N42, N52.
- The shape is the same in any grade.
The 20x10 disc magnet beside the 20x5 and the 25x2
The 20x10 is number 47 of the 51 Neodymium disc magnets published here, listed from 2x1 to 30x10.
- Diameter (D): 20 mm on the 20x10 disc magnet, against 20 mm on the 20x5 and 25 mm on the 25x2.
- Height (H): 10 mm on the 20x10 disc magnet, against 5 mm on the 20x5 and 2 mm on the 25x2.
Other sizes
- One size smaller: 20x5 Disc Magnet, Neodymium, 20 mm across, 5 mm high, nickel-plated, axially magnetised.
- One size larger: 25x2 Disc Magnet, Neodymium, 25 mm across, 2 mm high, nickel-plated, axially magnetised.
Conventions
- Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the disc a cylinder of diameter D.
- Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
- Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.
Documents
Sources
first4magnets-disc, supermagnete-magnets-disc. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...