20x3 Disc Magnet, Neodymium

STEP · STL Supports CommunityCAD0 downloads
20x3 Disc Magnet, Neodymium
1 / 5

20x3 Disc Magnet, Neodymium

The 20x3 disc magnet (Neodymium disc magnet) is 20 mm across and 3 mm high, nickel-plated and magnetised through the height. It comes as simplified STEP files.

20x3 disc magnet, Neodymium disc magnet

How these parts are made, and what the levels mean: read the method

  • Also known as: 20x3 round magnet, 20x3 rare earth magnet, 20x3 button magnet, 20x3 neodymium magnet
  • Model id: magnets-disc-20x3
  • Standard: Neodymium disc magnet · size 20x3

Files

Part keySimplified
magnets-disc-20x3STEP

Dimensions

Dimension symbols for 20x3 disc magnets (Neodymium disc magnet)

SymbolNameminnommaxModeledRuleLevel
DDiameter2020nominalL1
HHeight33nominalL1

Drawing

Drawing of the 20x3 disc magnet with its values (Neodymium disc magnet)

As a PDF: CC-MAGDISC-SZ-20x3.pdf.

What each maker states

  • supermagnete lists this size in N45.
  • first4magnets lists this size in N35, N42.
  • The shape is the same in any grade.

The 20x3 disc magnet beside the 20x2 and the 20x5

The 20x3 is number 45 of the 51 Neodymium disc magnets published here, listed from 2x1 to 30x10.

  • Diameter (D): 20 mm on the 20x3 disc magnet, the same on the 20x2 and the 20x5.
  • Height (H): 3 mm on the 20x3 disc magnet, against 2 mm on the 20x2 and 5 mm on the 20x5.

Other sizes

Conventions

  • Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the disc a cylinder of diameter D.
  • Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
  • Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.

Documents

Sources

first4magnets-disc, supermagnete-magnets-disc. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-MAGDISC-SZ-20x3.pdf

Neodymium disc magnet, diameter x height, 20x3 Size drawing - 20x3 values on the views - enlarged 8:1 Dimension Diameter Height, magnetised axis Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / =…

View full datasheet →

docs/CC-MAGDISC-DS-20x3.pdf

* CC-MAGDISC-DS-20x3 revA '?) CommunityCAD Size datasheet - 20x3 20 x 3 mm neodymium disc magnet Size datasheet: this size's values with their levels, conventions and sources. For Nickel-plated, magnetised through the height, any grade Files 1 STEP AP214 (simplified) 20x3, pole face, 1:1 20x3,…

View full datasheet →