15x8 Disc Magnet, Neodymium
The 15x8 disc magnet (Neodymium disc magnet) is 15 mm across and 8 mm high, nickel-plated and magnetised through the height. It comes as simplified STEP files.

How these parts are made, and what the levels mean: read the method
- Also known as: 15x8 round magnet, 15x8 rare earth magnet, 15x8 button magnet, 15x8 neodymium magnet
- Model id:
magnets-disc-15x8
- Standard: Neodymium disc magnet · size 15x8
Files
| Part key | Simplified |
|---|
magnets-disc-15x8 | STEP |
Dimensions

| Symbol | Name | min | nom | max | Modeled | Rule | Level |
|---|
| D | Diameter | | 15 | | 15 | nominal | L1 |
| H | Height | | 8 | | 8 | nominal | L1 |
Drawing

As a PDF: CC-MAGDISC-SZ-15x8.pdf.
What each maker states
- supermagnete lists this size in N42.
- first4magnets lists this size in N42.
- The shape is the same in any grade.
The 15x8 disc magnet beside the 15x5 and the 20x2
The 15x8 is number 43 of the 51 Neodymium disc magnets published here, listed from 2x1 to 30x10.
- Diameter (D): 15 mm on the 15x8 disc magnet, against 15 mm on the 15x5 and 20 mm on the 20x2.
- Height (H): 8 mm on the 15x8 disc magnet, against 5 mm on the 15x5 and 2 mm on the 20x2.
Other sizes
- One size smaller: 15x5 Disc Magnet, Neodymium, 15 mm across, 5 mm high, nickel-plated, axially magnetised.
- One size larger: 20x2 Disc Magnet, Neodymium, 20 mm across, 2 mm high, nickel-plated, axially magnetised.
Conventions
- Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the disc a cylinder of diameter D.
- Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
- Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.
Documents
Sources
first4magnets-disc, supermagnete-magnets-disc. Full citations: the method page and this size's datasheet.
Found an error? Use the feedback section on this page.
Comments
Sign in to leave a comment.
Loading comments...