15x5 Disc Magnet, Neodymium

STEP · STL Supports CommunityCAD0 downloads
15x5 Disc Magnet, Neodymium
1 / 5

15x5 Disc Magnet, Neodymium

15 mm across and 5 mm high, the 15x5 disc magnet (Neodymium disc magnet) is nickel-plated and magnetised through the height. Here as simplified STEP files.

15x5 disc magnet, Neodymium disc magnet

How these parts are made, and what the levels mean: read the method

  • Also known as: 15x5 round magnet, 15x5 rare earth magnet, 15x5 button magnet, 15x5 neodymium magnet
  • Model id: magnets-disc-15x5
  • Standard: Neodymium disc magnet · size 15x5

Files

Part keySimplified
magnets-disc-15x5STEP

Dimensions

Dimension symbols for 15x5 disc magnets (Neodymium disc magnet)

SymbolNameminnommaxModeledRuleLevel
DDiameter1515nominalL1
HHeight55nominalL1

Drawing

Drawing of the 15x5 disc magnet with its values (Neodymium disc magnet)

As a PDF: CC-MAGDISC-SZ-15x5.pdf.

What each maker states

  • supermagnete lists this size in N42.
  • first4magnets lists this size in N42, N52.
  • The shape is the same in any grade.

The 15x5 disc magnet beside the 15x3 and the 15x8

The 15x5 is number 42 of the 51 Neodymium disc magnets published here, listed from 2x1 to 30x10.

  • Diameter (D): 15 mm on the 15x5 disc magnet, the same on the 15x3 and the 15x8.
  • Height (H): 5 mm on the 15x5 disc magnet, against 3 mm on the 15x3 and 8 mm on the 15x8.

Other sizes

Conventions

  • Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the disc a cylinder of diameter D.
  • Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
  • Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.

Documents

Sources

first4magnets-disc, supermagnete-magnets-disc. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-MAGDISC-DS-15x5.pdf

* CC-MAGDISC-DS-15x5 revA '?) CommunityCAD Size datasheet - 15x5 15 x 5mm neodymium disc magnet Size datasheet: this size's values with their levels, conventions and sources. For Nickel-plated, magnetised through the height, any grade Part key magnets-disc-15x5 Files 1 STEP AP214 (simplified)…

View full datasheet →

docs/CC-MAGDISC-SZ-15x5.pdf

Neodymium disc magnet, diameter x height, 15x5 Size drawing - 15x5 values on the views - enlarged 8:1 Dimension Diameter Height, magnetised axis Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < / =…

View full datasheet →