10x10 Disc Magnet, Neodymium

STEP · STL Supports CommunityCAD0 downloads
10x10 Disc Magnet, Neodymium
1 / 5

10x10 Disc Magnet, Neodymium

10 mm across and 10 mm high, the 10x10 disc magnet (Neodymium disc magnet) is nickel-plated and magnetised through the height. Here as simplified STEP files.

10x10 disc magnet, Neodymium disc magnet

How these parts are made, and what the levels mean: read the method

  • Also known as: 10x10 round magnet, 10x10 rare earth magnet, 10x10 button magnet, 10x10 neodymium magnet
  • Model id: magnets-disc-10x10
  • Standard: Neodymium disc magnet · size 10x10

Files

Part keySimplified
magnets-disc-10x10STEP

Dimensions

Dimension symbols for 10x10 disc magnets (Neodymium disc magnet)

SymbolNameminnommaxModeledRuleLevel
DDiameter1010nominalL1
HHeight1010nominalL1

Drawing

Drawing of the 10x10 disc magnet with its values (Neodymium disc magnet)

As a PDF: CC-MAGDISC-SZ-10x10.pdf.

What each maker states

  • supermagnete lists this size in N45.
  • first4magnets lists this size in N42.
  • The shape is the same in any grade.

The 10x10 disc magnet beside the 10x5 and the 12x1

The 10x10 is number 34 of the 51 Neodymium disc magnets published here, listed from 2x1 to 30x10.

  • Diameter (D): 10 mm on the 10x10 disc magnet, against 10 mm on the 10x5 and 12 mm on the 12x1.
  • Height (H): 10 mm on the 10x10 disc magnet, against 5 mm on the 10x5 and 1 mm on the 12x1.

Other sizes

Conventions

  • Simplified only: a magnet has no thread, so there is one detail level. STEP AP214, millimetres, Z the axis of magnetisation, the origin at the centre of one pole face, the other pole face at Z = H; the disc a cylinder of diameter D.
  • Nominal sizes; both makers state +/- 0.1 mm, which is metadata and isn't modeled.
  • Edge round illustrative, not stated by the makers: every edge rounded at r = the smallest of the part's dimensions / 10, measured for fit.

Documents

Sources

first4magnets-disc, supermagnete-magnets-disc. Full citations: the method page and this size's datasheet.

Found an error? Use the feedback section on this page.

Comments

Sign in to leave a comment.

Loading comments...

From the datasheet

docs/CC-MAGDISC-SZ-10x10.pdf

Neodymium disc magnet, diameter x height, 10x10 Size drawing - 10x10 values on the views - enlarged 8:1 Dimension Diameter Height, magnetised axis Source levels Main value = the modeled value (nominal, else the middle of min-max). Grey under a value = its min-max, where the source gives both. < /…

View full datasheet →

docs/CC-MAGDISC-DS-10x10.pdf

* CC-MAGDISC-DS-10x10 rev A '?) CommunityCAD Size datasheet - 10x10. 10 x 10 mm neodymium disc magnet Size datasheet: this size's values with their levels, conventions and sources. For Nickel-plated, magnetised through the height, any grade Part key magnets-disc-10x10 Files 1 STEP AP214…

View full datasheet →